Frequency Response; Total Harmonic Distortion (Thd); Graphic Equalizer; Xr 600F Hum And Noise - Peavey XR 600F Owner's Manual

Frequency Response:

Mic Input to L - R Output
Line Input to L - R Output
To Power Amplifier Output

Total Harmonic Distortion (THD):

< 0.01% 20 Hz — 20 kHz mic input to L/R mon. output at nominal level (20 Hz — 80 kHz BW)
< 0.01% 20 Hz — 20 kHz line input to L/R output at output at nominal level (20 Hz — 80 kHz BW)
< .005% Typical at 1 kHz

Graphic Equalizer:

Filter Bandwidth
Filter Frequencies
Maximum Boost and Cut

XR 600F Hum and Noise:

Output
Main
Monitor
(Hum and noise measurements: 22 Hz to 22 kHz BW)
S/N Ratio:
> 85 dB below rated output (200 W/channel), mic/line to speaker output
Equivalent Input Noise (EIN):
-121.5 dBu (Input terminated with 150 ohms)
Crosstalk:
> 80 dB Adjacent Input Channels (20 Hz — 20 kHz)
> 70 dB Left to right outputs (20 Hz — 20 kHz)
Common Mode Rejection Ratio (Mic Input):
50 dB min. (20 Hz - 20 kHz)
60 dB typical @ 1 kHz
Residual Noise
Ref: 0 dBu
-98 dBu
-89 dBu
-81 dBu
-96 dBu
-90 dBu
-81 dBu
XR ® 600F
20 Hz — 20 kHz +0 dB/-1 dB
20 Hz — 20 kHz +0 dB/-1 dB
20 Hz — 20 kHz +0 dB/-1 dB
1 octave
63, 125, 250, 500 1 k, 2 k, 4 k, 8 k, 16 k
+12 dB Boost, -12 dB Cut
S/N Ratio
Ref: 2 dBu
-100 dB
-91 dB
-83 dB
-98 dB
-92 dB
-83 dB
Test Conditions
All controls down
One channel nominal, master
nominal
Master level nominal,
Channel level nominal, Mic
Inputs terminated @ 150 ohms
All controls down
One channel nominal, master
nominal
Master level nominal,
Channel level nominal, Mic
Inputs terminated @ 150 ohms