Advertisement
Available languages
Available languages
Stereo Inputs
Figure 3. RCA Input Connections
The cabling for these connectors should be of the standard‚ consumer unbalanced shielded type. If you are using a 2-
conductor shielded cable‚ make sure to connect the negative side of the signal to the shield. Note: Unbalanced signal
sources should be located within approximately 6' of the SMR™821a.
The Mode switch selects either Stereo mode or Mono mode
individually for channel 7 or 8. In Stereo mode‚ the Left input
signal feeds the Left mix bus and the Right input signal feeds the
Right mix bus via the front panel Level control. In Mono mode‚
the summed Left and Right signals feed both the Left and Right
mix buses. This allows for only one input to be used to feed
stereo mix buses. Additionally‚ it allows for Left and Right
outputs of the source to be summed without a Y-cable. In
either mode‚ a summed mono signal feeds the Aux mix bus.
Left Shield
Left "Hot" Audio
Right Shield
Right "Hot" Audio
8
Advertisement
