Basic Operating; Using The Remote Control - NuForce DDA-120 User Manual

Basic Operating

To Power on/off
IMPORTANT!
Speaker Output: Connect the left and right speaker cables to the output terminals. In order
to avoid shorting out the DDA-120, before turning on the power, please make sure that the
polarity of the speaker cables is properly terminated to the loudspeakers and the DDA-120.
To select the desired input, simply press the Input button it cycles through all 4 inputs sequentially.

Using the Remote Control

1
3
4
ON
5 Sec ...
INPUT
ON OFF
2
MUTE VOL
5
INPUT
6
Nuforce DDA-120 Integrated Amp
ON: Pressing after turning back switch for
15 seconds
OFF: Long pressing for 5 seconds
OFF
Input R1 – RCA Analog
Input C2 – Coaxial
Input U3 – Digital USB2.0
Input O4 – Optical Input #4
Input O5 – Optical Input #5
Iuput E6 – Expansion slot for a Bluetooth receiver
dongle
1. On : turns on the DDA-120
2. Off : turns off the DDA-120
3. Mute
4. Input : cycles through the DDA-120's six inputs
5. Vol : raises the volume
6. Vol  : lowers the volume
3