Nuforce DDA-120 Integrated Amp FCC STATEMENTS This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
INTRODUCTION consumer entertainment and streaming devices without the complexity of an audio/video receiver. digital via one USB, one coaxial, two optical inputs, and one expansion slot for a Bluetooth receiver dongle. Feafures • 176.4kHz input sampling rate • 3GB/s over-sampling rate for smoother, more natural reproduction •...
Speaker Output: Connect the left and right speaker cables to the output terminals. In order to avoid shorting out the DDA-120, before turning on the power, please make sure that the polarity of the speaker cables is properly terminated to the loudspeakers and the DDA-120.
Nuforce DDA-120 Integrated Amp Dim Mode In the Dim Mode, when the unit idles for three seconds or more, the front LED turns off. Note: When the LED is off, the unit is still operating. The LED will turn back on when the remote or knob are being employed.