Table of Contents
Advertisement
TROUBLE SHOOTING
PROBLEM
Bag full
Blocked tube
Blocked impeller
Damaged impeller
Dirty bag
Torn bag
Bag unzipped
Unit unplugged
PROBLEM
Unit is unplugged.
Power/speed switch is in the OFF position.
Defective power switch.
Vac tubes are not correctly installed.
Intake gate/cover is not closed.
UNIT WILL NOT BLOW OR VACUUM
UNIT WILL NOT START
- 13 -
CORRECTIVE ACTION
Empty bag.
Clear the blockage as described on page 10.
Clear the blockage as described on page 10.
Take the unit to an authorized service dealer.
Clean the bag.
Replace the bag.
Zip up the bag.
Plug into an outlet or an extension cord.
CORRECTIVE ACTION
Check cord to make sure it is plugged into an
electrical outlet.
Slide switch to high or low.
Return to place of purchase or return the unit to
a repair center.
Check vac tubes to ensure that they are
allowing the switch to be engaged when
correctly installed.
Ensure that gate/cover is fully closed and
locked.
Hide quick links:
Advertisement
Table of Contents
