To Open The Trunk Lid From Inside; Internal Trunk Lid Release Handle - Subaru legacy 2017 Owner's Manual

To open and close the trunk
lid from outside
The trunk lid can be opened using the
keyless access function or remote keyless
entry system. For details, refer to the
following section.
. For models with keyless access with
push-button start system , refer to Open-
ing trunk (Legacy) 2-16, Opening the
trunk lid (Legacy) 2-25 or Opening the
trunk lid (Legacy) 2-27.
. For models without keyless access
with push-button start system , refer to
Opening the trunk lid (Legacy)
Opening the trunk lid (Legacy)
To close the trunk lid, lightly press the
trunk lid down until the latch engages.
NOTE
. Do not leave your valuables in the
trunk when you leave your vehicle.
. Even when the trunk lid cannot be
opened using the remote keyless entry
system, you can open the trunk lid by
using the key. Refer to
(Legacy) if the trunk lid cannot be
opened 9-19.
To open the trunk lid from
inside
2-25 or
2-27.
Press and hold the trunk lid opener switch
for more than 1 second.
Trunk lid
Keys and doors/Trunk lid (Legacy)
Internal trunk lid release
handle
The internal trunk lid release handle is a
device designed to open the trunk lid from
inside the trunk. In the event children or
adults become locked inside the trunk, the
handle allows them to open the lid. The
handle is located on the inside of the trunk
lid.
To open the trunk lid from inside the trunk,
pull the yellow handle as indicated by the
arrow on the handle. This operation
unlocks the trunk lid. Then, push up the
lid.
The handle is made of material that
remains luminescent for approximately
an hour in the dark trunk space after it is
exposed to ambient light even for a short
time.
CONTINUED
2-39