Communication With Pc And Mac Software (Davis Instruments Only); Weatherlink Software - Ambient Weather WeatherBridge Quick Start Manual

For additional information on Push Services, please visit:
http://meteobridge.com/wiki/index.php/Push_Services
13. Communication with PC and Mac software (Davis
Instruments only)
If you own a Davis Instruments weather station, and own a WeatherLink data logger (6510USB,
6510SER or 6520), you can run WeatherLink software while the WeatherLink data logger is
connected to the WeatherBridge.

13.1 WeatherLink Software

1. Run WeatherLink software from any computer on your local area network
2. Select Setup | Communications Port.. from the menu bar.
3. Select TCP/IP as the communications. The TCPIP port is 22222 (default). Enter the IP
address of WeatherBridge, as shown in Figure 18 (your IP address will be different than the
example below).
Version 1.10
Figure 17
©Copyright 2016, Ambient LLC. All Rights Reserved. Page 20