Table Of Contents - Honeywell HRO-50 Product Installation & Operation Manual

Step 4:
Cut the 1/4 "PE pipe at appropriate length. Insert the threaded flow-limiting plug supplied
with the reverse osmosis membrane filter cartridge into the 1/4"PE pipe (Figure 10), then
insert the 1/4"PE pipe with flow-limiting plug into the quick connection hole at the
bottom of the reverse osmosis membrane filter cartridge at the 4th stage (Figure 11), and
finally put the other end into the sewer or recycling container.
Figure 10
Step 5:
Open the cover and rotate the control valve according to the water purification require-
ments. Align it with R to produce reverse osmosis water; and rotate clockwise to M to
produce mixed water (Figure 12).
Step 6:
Connect the PE pipe connected in Step 4 to the water purifier (Figure 13).
Place the water purifier in the appropriate position (Figure 14).
Water
inlet
Figure 13
Installation Instructions
Figure 12
To faucet
To storage
tank
8
To the sewer
or recycling
container
Figure 11
Figure 14