filter cartridge at the fourth stage of the filter adapter, and rear activated carbon filter
cartridge at the fifth stage of the filter adapter.
Align the 2 connection pipe of the filter cartridge to the connection holes of the filter
adapter, and rotate counter-clockwise to the end. (Figure 5).
Step 3:
Cut the 1/4'' PE pipe into three sections. The incision must be flat. Connect them with tee
joint ball valve connector (Figure 6,7), storage bucket and drinking water faucet
separately (Figure 8,9).
Figure 6
Figure 8
Installation Instructions
1
2
Figure 5
Plug
Ring
Nut
5
3
4
Cold water pipe
connection nut
Gasket
Three-way
Gasket
Cold water
valve
Figure 7
1/4" PE pipe
Figure 9
7
Ball valve
Nut
1/4" PE pipe
PTFE tape
Lock nut
L adapter
Gasket
Threaded nipple