Advertisement
7
D
'\
. . . .
~II
. . . . . . . ,
)
LISTENING TO
RADiO:;
14. AUDIO CONTROL KNOB I BUTTON
This electronic volume control knob/button is used to select and control all functions related
to the volume and sound quality of the audio unit.
VOLUME ,-
To adjust the vol.ume, simply turn the Audio Control Knob Clockwise to increase
the volume level or anti-clockwise to decrease the volume level.
Note: By pressing the AUDIO CONTROL KNOB / BUnON once, this also selects the Volume
Control.
BASS - To increase or decrease the BASS, simply press the AUDIO CONTROL KNOB / BUnON
twice until BAS appears on the LCD. Use the AUDIO CONTROL KNOB to adjust the BASS
settings,
TRE.BLE - To increase or decrease the TREBLE, simply press the AUDIO CONTROL KNOB /
BUTTON 3 times until TRH appears on the LCD. Use the AUDIO CONTROL KNOB to adjust the
TREBLE settings.
BALANCE - To change the Speaker BALANCE, simply press the AUDIO CONTROL KNOB /
BUTTON" times until BAL appears on the LCD. Use the AUDIO CONTROL KNOB to adjust the
BALANCE settings.
FADER - To change the Speaker FADER, simply press the AUDIO CONTROL KNOB / BUnON
5 times until FAD appears on the LCD. Use the AUDIO CONTROL KNOB to adjust the FADER
settings.
15. MUT - MUTE BUTTON
Press this button once to MUTE the audio sound.
To turn the MUTE feature OFF, simply press the MUT button again or use the Audio Control
Knob and turn the Volume Up or Down.
16
DSP - Equaliser Setting
Press this Button to change the equaliser settings.
There are 4 Options to choose from.
Press the DSP Button once to select FLAT
Press the DSP Button twice to select CLASSICS
Press the DSP Button 3 times to select POP
Press the DSP Button 4 times to select ROCK
Press the DSP Button 5 time to turn DSP feature Off
17.
EJECT BUTTON
Press to Eject CD's.lf the CD is not removed within 8 seconds it will automatically re-insert.
18.
LCD (LIQUID CRYSTAL DISPLf.l.Y)
19.
CD SLOT
Insert and remove CD's from this slot.
TURNING THE AUDlO UNIT ON
Press the POWER 8utton located at
the
top left hand side corner to turn the Unit ON.
~,
~
U
Iv
i
EJ
LISTENING TO
AM (MW) '(522KHz
to
1620KHzl -
S,tore up
to
6 AM
Slatlo:n.s
in
Memory
To Listen to AM (MW) simply press the AM Button Once.
(MW and the frequency will appear on the LCD)
Refering to the tuning method explained on page 6 of this Manual, tune in your desired radio
station. Use the Presets (1-6) to store stations into memory.
I
AM
~
Fit
11
OD
I
1 Press
1 Press
2 Press
3 Press
LISTENING TO FM (87.5MHz to 108.0MHz) - Store up to 18 FM Stations in Memory
To Listen to FM simply press the FM Button Once.
. (F1 and the frequency will appear on the LCD)
Refering to the tuning method explained on page 6 of this Manual, tune in your desired radio
station. Use the Presets (1-6) to store stations into memory.
Press the FM Button again (F2 and the frequency will appear on the LCD). Now you can store
a further 6 Presets into Memory (F2)
Press the FM Button a third time (F3 and the frequency will appear on the LCD). Now you can
store a further 6 Presets into Memory (F3)
Once you've selected a radio station, you can then adjust the Bass, Treble, Balance or Fader
settings. Refer to Page 5 for further details.
Advertisement
