Advertisement
ASSEMBLY INSTRUCTION
Step 1:
Attach the Front Stabilizer (2) and the Rear
Stabilizer (3) onto the Main Frame (1),
secure with the Carriage Bolts (7), Arc
Washer (8) and Acorn Nuts (9) which are
pre-attached to the stabilizers, then tighten
the nuts.
Step 2:
Insert the Handlebar Post (4) into the Main
Frame (1), secure in place with the Hexagon
Socket Pan Head Bolt (17) and Arc Washers (18)
which are pre-attached to the Main Frame.
Note: Ensure that ALL bolts and washers are in
place and partially threaded in before
completely tightening any ONE bolt。
Advertisement
