Light Indicators An authorized The indicators on the UFO give you an idea of the A single indicator smartphone is flashes constantly looking in on current device status. Here is a list of what each pattern the video means, with the UFO positioned as shown:...
Page 4
Tap on [UFO Panoramic WiFi HD Camera], or tap on the 2. Sign Up/In ] icon at the bottom of this page to scan the QR code If you have not registered an account with smanos, on the back of your UFO; then follow the configuration please press “Sign up”...
Page 5
Step 1. Waiting for the UFO to boot up Once the UFO is ready for launch, the indicators will flash Plug the power adapter into a wall socket and the UFO on the right then on the left as a row, which means it is camera will boot up in 25 to 40 seconds.
Page 6
Step 2. Connecting the UFO to your smartphone Tap on [WiFi] to jump to your smartphone’s WiFi list, and select “smanos UFO” to connect to the camera. Now, Press and hold the Configuration Button on the side for 5 your smartphone is the control center of your UFO.
Pick the 2.4GHz WiFi network from the display list for Ceiling or Wall-Mounted your UFO camera and enter the WiFi network password. The UFO will connect to the selected WiFi network. The binding process should take about one minute. UP ↑...
Put the power cable (USB) through the bottom hole of your bracket. Step Two: Insert the USB into the power port. Technical support: Step Three: Lock your camera onto the bracket. http://www.smanos.com/UFO Step Four: Make sure the PIR motion sensor is pointing vertically to the desk/ground. support@smanos.com...
Need help?
Do you have a question about the UFO and is the answer not in the manual?
Questions and answers