Connecting The Joystick; Notes On Use - Speed Link BLACK WIDOW User Manual

SOFTWARE INSTALLATION
Note: First install the supplied
software before you connect the
joystick to the USB port of your PC.
(Please note that USB operation is
not supported by 95/NT.)
1. Switch on your computer and wait
until the operating system
has finished starting up.
2. Insert the supplied driver CD in your
CD ROM drive.
3. The installation program will start
automatically.
4. If the installation program does not
start automatically, click on "Start/
Run/Browse" and select your CD
ROM drive.
5. Double click on the file "setup.exe".
6. Follow the instructions on the
screen.
7. Restart your PC when you are
asked.

CONNECTING THE JOYSTICK

1. After the driver installation, simply
connect the USB socket of your
joystick to the USB port of your
computer
2. The joystick is now ready to use.

NOTES ON USE

To test all of the Joystick's functions,
do the following:
1. Connect the joystick to the USB port
of your PC.
2. In Windows, open "Start/Control
panel/System".
3. Double click on "Game controllers"
("Sound, video and game
controllers" under Windows Me)
to display a context menu.
4. In the context menu, the entry
"MegaStore Game Controller v.3"
should be listed.
5. Click on properties to test
operation of the buttons, axes, thrust
and rudder control of the joystick.
6. Click on the "Effects" tab to test the
vibration function of your joystick.
7. If all functions work to your
satisfaction, click on "OK" to
exit the menu.
9