Charging The Unit; Using The Foil Cutter - Brookstone APERTO Manual

CHARGING THE UNIT

1. Plug one end of the ADAPTER cord into the DC JACK on
the CHARGING BASE and the other end into an outlet.
2. Place the WINE OPENER on the CHARGING BASE,
ensuring that it's firmly in position and fully engaged with
the charging connectors. The CHARGING LED will
illuminate while the unit is charging and will turn off when
the unit is fully charged. It will take approximately 8 hours
to charge.
3. The WINE OPENER will open approximately 60 bottles on
a full charge.
IMPORTANT: The CHARGING LED must illuminate to
ensure the unit is charging correctly.
12

USING THE FOIL CUTTER

Before using the WINE OPENER, remove any foil from the top
of the bottle.
1. Remove the FOIL CUTTER from the WINE OPENER.
2. Place the FOIL CUTTER over the top of the wine bottle.
3. While gripping the FOIL CUTTER, push down and twist a
half turn. Lift the FOIL CUTTER from the wine bottle.
4. Replace the FOIL CUTTER on the WINE OPENER.
13