Subscribe to Our Youtube Channel
Related Manuals for Galleon SignalClocks
Summary of Contents for Galleon SignalClocks
- Page 1 PoE Digital Clock PoE Digital Clock Installation and User Guide Page1 TEL: +44 (0) 121 608 4433 www.galsys.co.uk FAX: +44 (0) 121 608 4477 galleonsupport.com...
-
Page 2: Table Of Contents
PoE Digital Clock CONTENTS Introduction Technical Specifications Installation Power over Ethernet cabling plan Small scale installations Sites with PoE enabled network equipment Sites with no existing PoE equipment Mounting the clock Configuration Telnet configuration Establishing a connection to the clock List of commands DST Settings Information Quick Setup Guide... -
Page 3: Introduction
PoE Digital Clock INTRODUCTION The Ethernet clock developed by SignalClocks is a robust, light weight and low maintenance unit, designed from mild steel and finished with a smooth powder coating. Using Power over Ethernet (PoE), digital clocks can be synchronized with a network timeserver, are easy to setup and use highly visible LED characters to display optically clear readings. -
Page 4: Installation
Note - A power injector requires a connection to AC power and may be connected to a battery backed uninterruptable power supply (UPS). Galleon Systems offers a single port PoE injector for sale to support demonstration systems. For more information on these please call our Sales Team on 0121 608 7230. -
Page 5: Sites With No Existing Poe Equipment
For areas that aren’t equipped with a PoE enabled network, then the setup is typically best served by using a Power Injector. If you choose this method and have a power injector supplied by Galleon, then connect the sub/switch to the port labelled “LAN” on the power injector, and then connect the clock to the port labelled “PoE”... -
Page 6: Configuration
PoE Digital Clock CONFIGURATION TELNET CONFIGURATION The clocks can be configured individually using a telnet session. This will need to be done on every clock in turn. Using Telnet, you can configure all of the clocks settings including: IP Address; ... -
Page 7: List Of Commands
PoE Digital Clock LIST OF COMMANDS A list of all the commands available is as follows: Shows Time o A xx:xx:xx Sets Time (For when you’re not using NTP) Shows Date Shows Colon Flash Settings o C on Sets Colon Flash On o C off Stets Colon Flash Off... - Page 8 PoE Digital Clock Shows Time Format o J 12 Sets 12 Hour Time Format o J 24 Sets 24 Hour Time Format Shows Version Shows list of Network Settings Shows Subnet Mask o M xxx.xxx.xxx.xxx Sets Subnet Mask ...
- Page 9 PoE Digital Clock Shows DST Settings * o V x:x:x:x x:x:x:x Sets DST String Shows Nameserver o W xxx.xxx.xxx.xxx Sets Nameserver Reboots the clock Quit Session Help – Shows basic list of commands *Read DST settings information Page9 TEL: +44 (0) 121 608 4433...
-
Page 10: Dst Settings Information
Hour:= 2 DST End Month:= October Week:= Last Day:= Sunday Hour:= 2 A tool to help calculate the DST Settings String can be found in the Knowledgebase on the Galleon Support website – http://support.galsys.co.uk/index.php?/Knowledgebase/Article/View/32/20/daylight-savings- time-calculator Page10 TEL: +44 (0) 121 608 4433 www.galsys.co.uk... -
Page 11: Quick Setup Guide
PoE Digital Clock QUICK SETUP GUIDE This is a quick setup guide to get you started. Use the following commands to get your clock setup quickly on a DHCP network. Connect to the clock via telnet: telnet xxx.xxx.xxx.xxx 3001 USER USER d yes f xxx.xxx.xxx.xxx... -
Page 12: Troubleshooting
PoE Digital Clock TROUBLESHOOTING Use this section to quickly troubleshoot minor issues or common problems. For any further support, please contact us using our Support Website, which can be found at: galleonsupport.com CONDITION SOLUTION The digital clock face is dark Verify that the network port is capable of supplying PoE Power. -
Page 13: Warranty And Maintenance
Galleon systems. This Warranty does not apply if repairs are required due to acts of nature beyond Galleon systems’ control such as, but not limited to, lightning strikes, power surges, misuse, damage, neglect, or if repairs/modifications have been made or attempted by anyone other than personnel authorised by Galleon Systems.
Need help?
Do you have a question about the SignalClocks and is the answer not in the manual?
Questions and answers