Download Print this page

GE gsd2400 Use And Care Manual page 16

Built-in dishwashers

Advertisement

Questions?
Use This
Problem Solver
PROBLEM
UNCLEiN DISHES
AND FLATWARE
BLACK OR GRAY
MARKS ON DISHES
DETERGENT LEFT
IN DISPENSER CUPS
SP(YB AND FILMING
ON GLASSES AND
FLATWARE
POSSIBLE CAUSE AND REMEDY
A
fuse in your home maybe blown, or
the circuit breaker
tripped.
Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins, or something small may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely placed
in dishwasher.
Make sure inlet water temperature is correct. (See page 10.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the
bOttOIXl
rack.
Check for improper loading. Dishes shouldn't nest together. Avoid overloading.
Check the rinse agent dispenser to see that it's not empty.
Check inlet water temperature. It should be at least 120"F.(Totest, see page 10.)
Water pressure may be temporarily low. Tbrn on a faucet. Is water coming out slower
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See page 19.)
Improper rack loading. (See pages 12through 14.)
Aluminum deposits often leave marks when they rub against other things. Remove
marks with a mild abrasive cleanser.
Water may not be reaching the detergent cups. Move dishes that maybe blocking the
detergent cup.
The dispenser cover may not be opening or may be blocked by improperly loaded
items. If you used a powder detergent, open the cup and remove any caked-on
detergent. If the cup still doesn't open automatically, call for service.
Detergent may be old. If the powder detergent is hard or caked in the box, throw it away.
The detergent may not be working well. Try another brand.
Spotting can be caused by all these things:
Extremely hard water. (See page 10.)
Low inlet water temperature. (To test, see page 10.)
Overloading the dishwasher.
Improper loading. (See pages 12through 14.)
Old or damp powder detergent.
Phosphate level in detergent too low. (See page 10.)
Rinse agent dispenser empty. (See page 10.)
16

Advertisement

loading

This manual is also suitable for:

Gsd2200