D-Link DSL-2640U Quick Installation Manual page 22

DSL-2640U
8. If your ISP uses MAC address binding, in the Ethernet section, in the
MAC field, enter the MAC address registered by your ISP upon
concluding the agreement. To set the MAC address of the network
interface card (of the computer that is being used to configure the router
at the moment) as the MAC address of the WAN interface, click the
Clone MAC address of your computer
address of a device connected to the router's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically). To set the router's MAC address as the MAC address of
the WAN interface, click the
icon (
9. For connection of PPPoE type: in the PPP section, enter authorization
data provided by your ISP (the username (login) in the Username field
and the
fields), or select the Without authorization checkbox if authorization
is not required.
).
in the Password and Password confirmation
password
Quick Installation Guide
icon (
Restore default MAC address
). To set the
22