Troubleshooting - Capresso #591 Instructions Manual

CLEANING
Always unplug your coffee grinder before cleaning.
• Remove the ground coffee container, its lid, and the bean container lid and
clean them in a warm water and mild liquid soap solution.
Do not place these items in the dishwasher.
• Empty the bean container. The transparent part of the bean container can be
wiped on the inside and outside with a damp cloth.
Do not clean the bean container with water.
• Remove ground coffee from the grinder chute (1.8) with the included cleaning
brush (1.11).
• The base (1.7) of the grinder can be wiped clean with a damp cloth.
CAUTION: Never immerse the grinder in water or any other liquid.
Do not use harsh or abrasive materials to clean the coffee grinder.
CLEANING/REMOVING THE UPPER BURR DISK
1. Set the fineness selector dial (1.6) to the finest grind setting.
2. Grasp the top of the upper burr disk (1.2), turn clockwise and pull upward
vertically to remove it from the bean container (1.3).
3. Lift the upper burr disk out of the grinder.
Note: Do not unscrew the upper burr from its housing!
4. Clean both the removable upper burr disk, and the permanent lower burr
disk with the included cleaning brush (1.11).
Note: Never use water to clean the burr disks!
5. To reinsert the upper burr disk, set the fineness selector dial (1.6) to the
coarse grind setting. Insert the upper burr and turn counterclockwise until
it is locked into place.

TROUBLESHOOTING

The grinder does not work when On/Off button is pushed.
- Make sure that the plug is inserted correctly into a working outlet.
- Ensure the lid of the bean container is properly placed onto the housing.
- Check that the ground coffee container and its lid are placed correctly into
the base.
The grinder stops during operation.
- The grinder is overheated. The resettable thermal fuse of the motor was activated.
To reset the thermal fuse, allow the appliance to cool down for approximately
30 minutes.
To avoid overheating, do not exceed the MAX indications of the ground coffee
container.
- A removable part has become dislodged. Check that the coffee bean container
lid (1.1) and the ground coffee container (1.9) and its lid (1.10) are correctly
placed into the housing of the machine.
6.