IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body of machine in water or other liquid.
SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A. A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B. Extension cords are available and may be used if care is exercised in their use.
Page 4
Fig. 1 A Bean Container Lid B Bean Container C Cup Selector D Ground Coffee Container E Max Line for Ground Coffee Grinding Area IMPORTANT! Align markings before inserting bean container. Fig. 2 Fig. 3 Fig. 3a...
1. BEFORE INITIAL USE 1. Carefully unpack your grinder and remove all packaging material. 2. Wipe the base, lid and containers with a dry, clean cloth. 3. Lift the upper burr (Fig. 5) and check if the grinding chamber is free of any foreign objects (Fig.
5. The finer the grind setting the longer it takes to grind a certain amount of coffee, e.g. in a very coarse setting the machine will grind more coffee in 20 seconds than in a very fine setting. 6. When grinding in the two or three finest settings (for Turkish coffee) only fill a few scoops of coffee beans into the bean container and check if the ground coffee passes through into the ground coffee container.
Page 8
Our general recommendations are: • Espresso pump machines with non-pressurized sieves EXTRA FINE • Manual preparation of Turkish coffee (finest setting) • Espresso pump machines with pressurized sieves FINE • Stove-top mocha • Drip coffee makers (When using GoldTone filters, use a somewhat coarser setting;...
6. LIMITED WARRANTY This warranty covers your Capresso Infinity Plus Conical Burr Grinder (Model #570 and #575). This warranty is in effect for one year from the date of the first consumer purchase. This warranty covers all defects in materials or workmanship (parts and labor).