Login - Megasat SAT-IP Server 3 Quick Manual

3. Login

After you have the server properly connected, turn it on. The SAT>IP Server automatically
connects to the network (DHCP must be enabled on the network).
The server can be easily configured with a PC. Use an Internet browser (Internet Explorer,
Chrome, Firefox, ...) to configure it. The PC must be located on the same network.
Open the Internet browser and enter the IP address that was assigned to the SAT>IP
Server on the local network (eg 191.168.19.107:8000). Then press Enter. This IP address
is assigned by the network router, where can be found in the configuration menu (the
DHCP protocol must be enabled on the router).
Once the browser has successfully connected to the server, the „Login" page will be dis-
played.
admin
Default User:
Default Password: admin
Enter the login information and click on the „Login" button.
ENGLISH
08