Table of Contents
Advertisement
SAFETY and OPERATING INSTRUCTIONS
For use with all imaginfires Bioethanol fireplaces
For decorative and domestic use only
PLEASE READ FULLY BEFORE USING THE FIREPLACE FOR THE FIRST TIME
These Safety and Operating Instructions are part of this Bioethanol Fireplace. Please keep in a safe
place for future reference. Any fireplace featuring naked flames or using flammable liquids has a
potential risk of burns or injury. These fireplaces become hot with use, especially the external surfaces.
They are safe when the user exercises common sense and reads this manual. Under no circumstances
should these products be used unless these Safety and Operating instructions have been read first.
Ensure that children, other persons or animals are adequately supervised during the use of this
product.
This Bioethanol Fireplace has been tested to European Standard EN 16647:2015 and British Standard
BS 16647:2015 by a recognized independent testing agency. If used in conjunction with this user
manual this Imaginfires Bioethanol Fireplace is compliant with these standards.
Please note, you have 14 days from delivery of your fireplace to report any defects or damage.
Contact us at
support@imaginfires.com
or call us on 01443 203994 if you have any problems.
For the latest safety advice on using our Bioethanol Fires and a range of frequently asked questions
please refer to
www.imaginfires.co.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ImaginFires IMBF03B
Summary of Contents for ImaginFires IMBF03B
- Page 1 BS 16647:2015 by a recognized independent testing agency. If used in conjunction with this user manual this Imaginfires Bioethanol Fireplace is compliant with these standards. Please note, you have 14 days from delivery of your fireplace to report any defects or damage.
- Page 2 WARNINGS BEFORE USING YOUR BIOETHANOL FIREPLACE The following 2 important safety symbols are found on the steel burner box and mean: *DO NOT FILL WHEN WARM OR IN OPERATION* • Restrict the use of this appliance to persons who read, understand and follow the warnings and instructions in this manual as well as any markings on the fireplace.
- Page 3 • Do not operate if under the influence of alcohol, drugs or prescribed medication. • The stainless steel fuel box supplied must be replaced if there are any signs of cracks, corrosion or misshaping. Please contact us at support@imaginfires.com to discuss a replacement. • Always observe local legislation.
- Page 4 POSITIONING THE ARKLE AND ANYA BIOETHANOL FIREPLACES • The ARKLE and ANYA should only be used in an existing fireplace or chimney breast and are not suitable as freestanding models in a room. The manufacturer cannot be held responsible for any damages resulting out of incorrect use of the product.
- Page 5 ASSEMBLING YOUR ALDEN BIOETHANOL FIREPLACE This section is ONLY for assembling the ALDEN Bioethanol fireplace. For all other products please refer to the “ASSEMBLING OTHER BIOETHANOL FIREPLACES” section Firstly, you will need the backing plate and the base unit as shown.
- Page 6 OBLOSK WHITE (IMBF05W) OBLOSK BLACK (IMBF05B) GLOBUS WHITE (IMBF11W) GLOBUS BLACK (IMBF11B) MYLOR (IMBF22) ETON WHITE (WB1W) ETON BLACK (WB1B) ARKLE (IMBF37)
- Page 7 ANYA (IMBF38) STOW WHITE (IMBF14W) STOW BLACK (IMBF14B) SALCOMBE (IMBF107) BREDON (IMBF40B) DORSET (IMBF110)
- Page 8 MALVERN (IMBF67B) PEMBREY (IMBF103) HOWARTH WHITE (IMBF106W) HOWARTH BLACK (IMBF106B) BIRKDALE (IMBF100) CHISWICK (IMBF101)
- Page 9 • If you need additional help, please contact us at support@imaginfires.com ALDEN WHITE (IMBF03W) ARLINGTON WHITE (IMBF35W) ALDEN BLACK (IMBF03B) ARLINGTON BLACK (IMBF35B) BANCROFT (IMBF23) FUEGO WHITE (IMBF12W) FUEGO BLACK (IMBF12B)
- Page 10 HENLEY WHITE (IMBF20W) MARLOW WHITE (IMBF21W) HENLEY BLACK (IMBF20B) MARLOW BLACK (IMBF21B) Hang the 2 brackets indicated by ‘B’ onto the Affix the bar indicated ‘A’ to the wall bracket ‘A’. Affix to wall by using the screws with the screws supplied, ensure that supplied.
- Page 11 INSTRUCTIONS FOR BREDON, DORSET, HOWARTH, MALVERN, PEMBREY & SALCOMBE This section is specific to the BREDON, DORSET, HOWARTH, MALVERN, PEMBREY and SALCOMBE models only but must be read in conjunction with the rest of the SAFETY AND OPERATING INSTRUCTIONS. • ALWAYS use the supplied tool and glove when operating these bioethanol fireplaces. Failure to do so is dangerous as the external surfaces of this range of fireplaces become much hotter than other models as the flame is fully enclosed.
- Page 12 Never pour Biofuel down drains. Follow municipal bylaws for the appropriate storage and disposal of bioethanol fuel. • You can buy fuel from our website (www.imaginfires.co.uk). We strongly recommend that you only use Bioethanol fuel with at least 95% alcohol content.
- Page 13 Once you have assembled your fireplace (if required) you are now only a few minutes away from enjoying the real flame. • Ensure that the imaginfires “LOGO” on the stainless steel fuel box is facing the front of the fireplace. See Below •...
- Page 14 • Fill the steel burner box with bioethanol fuel. As shown below. It is recommended to use a funnel or squeezable bottle (such as the fuel bottles available on our website www.imaginfires.co.uk) • Never pour more than 1 litre of fuel into the fuel box at any time and never fill past the “MAX”...
- Page 15 • Once the fireplace is cleaned, ensure it is dry before attempting to light. • Regularly check the inner steel fuel box and the outer chamber (if applicable to your model) for any signs of misshaping or leakage. Contact support@imaginfires.com should you need a replacement.
-
Page 16: Product Specification
PLEASE NOTE : This Bioethanol Fireplace has been tested to European Standard EN 16647:2015 and to British Standard BS 16647:2015 by a recognized independent testing agency. If used in conjunction with this user manual this Imaginfires Bioethanol Fireplace is compliant with these standards CONTACT DETAILS If you have any questions, please contact our knowledgeable friendly staff at support@imaginfires.com...
Need help?
Do you have a question about the IMBF03B and is the answer not in the manual?
Questions and answers