Advertisement
Quick Links
Tivolli Ltd, 2nd Floor,145-157 St John Street, London, EC1V 4PY, 01242 694806
!
Before'you'use'the'fire,'please'read'thoroughly.!!
!
Any fire featuring naked flames or using flammable liquids has a
potential risk of burns or injury. These fires are safe when the user
exercises common sense and reads this manual. Under no
circumstances should these products be used unless these Safety and
Use Instructions have been read first.
!
Introduction!
Bio-ethanol is a clean burning fuel derived from plants. When these fuels burn, they
release moisture back into the atmosphere and, as long as the burner box is clean
and free from debris, there should be no noticeable smoke.
No special permits, installation or construction regulations are required to use
this appliance and no electrical or gas connection is required.
Safety!Instructions!
By purchasing this product, you agree to exercise common sense at all
•
times when operating the fire. Ensure that other persons or animals are
adequately supervised and any risk is minimised during the use of this
product.
Never put petrol inside or near the biofire. This is extremely dangerous.
•
Use only Bioethanol Fuel developed for Bioethanol Fireplaces.
Restrict the use of this appliance to persons who read, understand and follow the
•
warnings and instructions in this manual.
Never leave the fire unattended. Always extinguish the fire fully before
•
Safety'and'Use'Instructions'
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ImaginFires fireplace
Summary of Contents for ImaginFires fireplace
- Page 1 Tivolli Ltd, 2nd Floor,145-157 St John Street, London, EC1V 4PY, 01242 694806 Safety'and'Use'Instructions' Before'you'use'the'fire,'please'read'thoroughly.!! Any fire featuring naked flames or using flammable liquids has a potential risk of burns or injury. These fires are safe when the user exercises common sense and reads this manual. Under no circumstances should these products be used unless these Safety and Use Instructions have been read first.
- Page 2 Never position the fire in a location where there is a risk of wind blowing the fire • into flammable items or materials. Do not use the fireplace and its steel burner box near flammable items such as • curtains, fabrics, furniture, aerosol sprays or other flammable items. Ensure all...
- Page 3 No. The fuel burns without any smoke. Where can I buy replacement bio fuel? • You can buy fuel from our website (www.imaginfires.com). We strongly recommend that you only use bioethanol fuel with at least 96.6% alcohol. How do I light my imagin fire? •...
- Page 4 keep a suitable distance from the flame. Never top up the fuel whilst there is any fire or heat in the burner box. What should I do if I spill any biofuel whilst trying to fill the burner box? • Just mop up any spilt fuel before you light the fuel in the box.
-
Page 5: Extinguishing The Fire
The fire will only ignite if the fuel box is 1/2 full or more. • Always fully remove all spilt fuel before igniting your Biofire. Remove spilt fuel • with an absorbent tissue and clean with a damp cloth to prevent ignition outside the burner reservoir. - Page 6 If it is necessary to extinguish the flame before the fuel has completely burned • out, use the tool provided to fully close the shutter on the burner box. Wait until the flame is completely extinguished before touching any part of the fireplace or leaving it unattended. Refilling!fuel!in!the!steel!burner!box!!
- Page 7 This bioethanol fireplace is designed to be fitted to either an interior or exterior wall. These instructions are for guidance only, since the type of wall and required fittings can vary greatly.
- Page 8 Drill 4 holes into the wall at the places marked in previous step. (using an 8mm • drill bit). Insert 4 x 8mm wall plugs and 4 long screws. Leave the 4 long screws to protrude about 3cm from the wall, as this will be what the fire will hang on. For the next stage, you will need the backing plate and base unit shown (Remove •...
- Page 9 Using the 6 small screws, connect the backing plate to the base unit by the 6 • screw holes. (Indicated by arrows in below image) Note :You will find it easer if each screw is initially just put into the screw hole and only partly tightened. Only fully tighten when all 6 screws are positioned into their 6 holes in the base unit.
-
Page 10: Contact Details
Carefully insert the glass panel into the slot at the front of the Biofire. To light your Biofire, refer back to the section titled ‘Operating the Biofire’. CONTACT DETAILS: If you have any questions or comments, please contact us: Tivolli Ltd, 2nd Floor,145-157 St John Street, London, EC1V 4PY, 01242 694806 www.imaginfires.co.uk...
Need help?
Do you have a question about the fireplace and is the answer not in the manual?
Questions and answers