Measuring The Water Hardness - Philips HD8829 Manual

Memo Memo Memo
Aroma plus Espresso Cappuccino Coffee
Hot water
X 1
2
X Milk clean Calc
clean
Memo
Co ee
1
X
2
X
Memo Memo Memo
Aroma plus
Espresso Cappuccino Coffee
1 Hot water
X
X 2 Milk clean
Calc
clean

Measuring the water hardness

2 Make sure the ESPRESSO, CAPPUCCINO, COFFEE and HOT
WATER/MILK CLEAN buttons light up continuously.
3 Press the COFFEE button.
-
The machine starts to brew a cup of coffee to prepare the inner circuit
for use.This coffee is not drinkable.
4 Empty the cup after the brewing cycle is finished.
5 Place a container under the hot water dispensing spout.
6 Press the HOT WATER/MILK CLEAN button once. The machine starts
dispensing water.
-
The HOT WATER/MILK CLEAN button flashes slowly.
7 Let the machine brew hot water until the no water light lights up
continuously.
Note: If you want to stop the manual rinsing cycle, press the HOT
WATER/MILK CLEAN button; to restart press the HOT WATER/MILK
CLEAN button again.
8 Fill the water tank with fresh water up to the MAX indication
The machine is ready for use.
Note: The automatic rinsing cycle starts when the machine has been in
stand-by mode, or switched off , for more than 30 minutes. When you
have not used the machine for 2 or more weeks, you will need to perform
a manual rinse cycle.
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness strip supplied.
1 Immerse the water hardness test strip (supplied with the machine) in
fresh water for 1 second.
2 Remove the water hardness strip and and wait for 1 minute.
English
13