1. Manuals
  2. Brands
  3. White International Manuals
  4. Water Pump
  5. BIA-WP10-804448
  6. Instruction manual

White International BIA-WP10-804448 Instruction Manual

Bianco pumpz series 2 petrol engine powered pump
Hide thumbs
Table of Contents

Advertisement

Quick Links

Petrol Engine Powered Pump
Instruction Manual
BIA-WP10 - 804448

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BIA-WP10-804448 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for White International BIA-WP10-804448

Summary of Contents for White International BIA-WP10-804448

  • Page 1 Petrol Engine Powered Pump Instruction Manual BIA-WP10 - 804448...

  • Page 2: Table Of Contents

    CONTENTS 1. Safety information 2. Location of warning labels 3. Name of components 4. Pre-starting operation 5. Starting the engine 6. Stopping the engine 7. Maintenance 8. Troubleshooting 9. Storage 10. Specifications 11. Spare Parts 16-17...
  • Page 3 Thank you for purchasing this Bianco Petrol engine pump. This instruction manual describes the installation, usage and maintenance of our water pump and provides important safety information. Keep your manual in a convenient place for quick reference. This manual should be considered as a permanent part of this water pump and should remain with the pump if it is sold.

  • Page 4: Safety Information

    WARNING! Safety information User’s responsibility • Before using this product, carefully read and fully understand this instruction manual for proper operation and safety procedures. Failure to follow all instructions may result in personal injury or product damage. • Be sure that you are familiar with quick stop procedures and control operation of the water pump.

  • Page 5: Location Of Warning Labels

    Please carefully read and understand the symbols, safety information and precautions. Petrol mixture label 3 00 455 16 BIA-WP10 Petrol Engine Pump 100 l/min /1.6HP Displacement 42.7cm RPM 7500 Date Distributed by: White International Pty Ltd Made in China BIA-WP10...
  • Page 6 Components...

  • Page 7: Pre-Starting Operation

    Pre-starting operation IMPORTANT: Install the strainer on the end of the suction hose before operation. The strainer prevents foreign materials and protects the pump from block and component damages. CAUTION! To start this water pump, please check the following before each use: •...
  • Page 8 IMPORTANT: Use an oil/petrol mixture of 2-stroke engine oil and automotive unleaded petrol with a Research Octane Number of 90 or higher. NOTE: How to use the ratio pot 25: 1 Add petrol to the line marked 576 ml and then add 2-stroke engine oil to the line marked 600 ml.

  • Page 9: Starting The Engine

    Starting the engine CAUTION! Confirm that oil mixture of 2 stroke engine oil and unleaded petrol has been properly added in the fuel tank. CAUTION! Confirm that water has been properly added in the pump. 1). Turn the engine switch to the ON position. 2).
  • Page 10 Move the choke control lever upward to the CLOSED position. NOTE: Do not use the choke if the engine is warm. Move the throttle control lever away from the LOW position, about 1/3 of the way toward the HIGH position. 5).
  • Page 11 Move the choke control lever downward slowly to the OPEN position after the engine operates continuously. Move the throttle control lever to the HIGH position (left end).

  • Page 12: Stopping The Engine

    Stopping the engine Please follow the steps below to stop the engine: Move the throttle lever to the right end (low speed) Turn the engine switch to the OFF position NOTE: Turn the engine switch to the OFF position immediately to shut down the engine in an emergency.

  • Page 13: Maintenance

    Maintenance Maintenance Schedule NOTE: For commercial use, log hours of operation to determine proper maintenance intervals. Maintaining the air cleaner A dirty air cleaner will restrict air flow to the carburettor and result in less pump power. Service the air cleaner periodically to prevent carburettor malfunctions.
  • Page 14 Cleaning filter element: Slightly tap the filter element a few times, then blow it with compressed air (pressure ≤ 207 K Pa) from inside. Do not clean the filter element with brush, which will block the air passages of the element. Cleaning foam filter element: Wash the element in hot water with detergent or in a non flammable or high flash point solvent.
  • Page 15 Cleaning the fuel filter The fuel filter can be rinsed in hot water with detergent or can also be cleaned in non-inflammable or high-flash-point solvent. Dry it and put it back into the fuel tank. Maintaining the spark plug The recommended type of spark plug is L7RTC (TORCH) or equivalent. CAUTION! Take care not to touch the muffler due to high temperature on it’s surface when the engine is running or just stops.

  • Page 16: Troubleshooting

    Troubleshooting The engine will not start: Is the fuel type correct? Is there enough fuel? Has the fuel reached the carburettor? Is the fuel air cleaner blocked? Is the spark plug generating sparks? Uninstall and check the spark plug, clear off the dirt from around the plug and dry it.

  • Page 17: 10. Specifications

    10. Specifications BIA-WP10 Engine Pump 100 l/min NOTE: Specifications are subject to change due to technical improvements without prior notice.
  • Page 20 Subject to the conditions of the warranty, White International will repair any defective products free of charge at the premises of our authorised service agents throughout Australia and New Zealand if a defect in the product appears during the warranty period.

Table of Contents