Folding Benchseat - CITROEN C5 2008 Owner's Manual

2

Folding benchseat

The benchseat can either be totally
or partially folded (1/3-2/3).
To fold the rear left or right hand
seat, always start with the seat
cushion, never the backrest (risk of
damage):
• Move the front seat(s) forward
if necessary.
• Place the head restraints in
their lowest position or remove
them if necessary.
Check that the seat belt is correctly
positioned by the side of the back-
rest.
Ensure that you fasten the side
seat belts into their buckles (the
central seat belt should not be fas-
tened).
• Lift up the front of seat cush-
ion 1.
• Move seat cushion 1 against
the front seat(s).
R E A R S E AT S
• Pull control 3 forwards to
unlock the backrest 2.
• Move the backrest 2.
remove them from their fasteners.
When repositioning:
• Fold the backrest 2 back up
and lock it into place (the red
1
light on button 3 should go
out).
• Fold up the seat cushion 1.
• Replace the head restraints if
you had removed them.
Ensure that the front and rear back-
rests are correctly locked in place.
Be careful not to trap the seat belt and to correctly buckle
each belt, before each operation of moving the backrest. This
operation allows you to fold the backrests back up with their
seat belts and buckles ready for use by rear passengers.
3
The red light on button 3 should no
longer be visible - if not, push the
seat all the way back.
III
107