Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
FRONT OF CLOCK Features & Benefits 1. Atomic Clock Signal Strength 2. Day of the Week 3. Date 4. Time Zone Indicator 5. Moon Phase 6. Sensor Low Battery Indicator Outdoor Sensor Signal Strength 8. Current Indoor Temperature Arrow icon indicates the direction the temperature is trending.
SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Atomic Clock (RCC) AcuRite atomic clocks use a radio-controlled signal (RCC) to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy. Please note: Signal reception is normally better at night and when the weather is clear.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the clock and outdoor sensor are critical to the accuracy and performance of this product. Clock Placement Place clock in a dry area free of dirt and dust. To help ensure an accurate indoor temperature measurement, be sure to place the clock away from heat sources or vents.
OPERATION Using the Clock Backlight Settings This clock features an Indiglo backlight that automatically detects low lighting ® and illuminates the display in the dark. To select your backlight brightness preference, use the Backlight Switch, located on the back of the clock, to select between: HIGH, LOW, or OFF.
Troubleshooting If the wireless signal indicator shows no bars: • Relocate the clock and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other. • Make sure both units are placed at least 3 feet No outdoor sensor (90 cm) away from electronics that may interfere with the wireless communication (such as TVs, microwaves,...
If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance. Care & Maintenance Clock Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture.
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC 165 ft / 50 m WIRELESS RANGE depending on home construction materials 433 MHz OPERATING FREQUENCY Clock: 6 x AA alkaline batteries POWER Sensor: 2 x AA alkaline or lithium batteries Outdoor data: 30 second updates DATA REPORTING...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www. .com Installation Videos Register your Product...
Page 12
Weather Temperature Weather Kitchen Clocks Stations & Humidity Alert Radio Thermometers & Timers It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence ™...
Need help?
Do you have a question about the 75331 and is the answer not in the manual?
Questions and answers