Paxar Four Station Charger 6094 Operating Instructions Manual page 10

6094 Operating Instructions
4.
Carefully pull the fuse box straight out. Fuses are
attached, so be careful not to drop or jolt the fuses.
Make sure you are using the correct fuses for the voltage
you select.
5.
Using a screwdriver, pull the power selector straight out.
6.
Rotate the power selector to the setting required.
7.
Push the power selector all the way into the slot. Make
sure the selected number is facing you.
8.
Change all fuses to the correct fuses for the voltage
selected. See "Replacing Fuses" in Chapter 4.
9.
Replace the fuse box, pushing until it snaps closed.
4
CAUTION
Power
Selector