Canon EOS M2 Basic Instruction Manual page 39

With a Non-EF-M Lens
Use the Image Stabilizer switch on the lens.
Using the Image Stabilizer when Shooting

The Image Stabilizer cannot correct "subject blur", when the subject moves at
the time of exposure.

For bulb exposures, set the IS to <2>. If <1> is set, Image Stabilizer
misoperation may occur.

The Image Stabilizer may not be effective for excessive shaking such as on a
rocking boat.

The Image Stabilizer works in all focus modes.
 When the IS is set to <2>, H will appear on the screen.

When using a tripod, you can still shoot with the IS set to <1> with no
problem. However, to save battery power, setting the IS to <2> is
recommended.

The Image Stabilizer is effective even when the camera is mounted on a
monopod.
Set the STABILIZER switch to <1>.
1 Press the shutter button halfway.

The Image Stabilizer will operate.
2
Take the picture.

When the picture looks steady on the
LCD monitor, press the shutter button
completely to take the picture.
Image Stabilizer
39