Installation; Unpacking; Assembly; Location - Swisscom Top M48 User Manual

14

Installation

3
3.1

Unpacking

The package contains the following:
1 base
ó
1 receiver
ó
1 230 V mains adapter
ó
1 receiver cable
ó
1 telephone cable
ó
1 user manual
ó
1 headset with 2.5 mm jack (hands-free kit)
ó
3.2

Assembly

1. Connect one end of the power cable to the underside of the base and
the other end to a 230 V mains supply.
2. Connect one end of the telephone cable to the underside of the base,
the other to the telephone socket in your wall.
3. Connect one end of the receiver cable to the underside of the base,
the other to the receiver.
WARNING :
Use only the 230 V mains adapter supplied with this telephone. Different adapters
could damage your telephone.
3.3

Location

Keep the phone on a non-slip surface. Varnish and other synthetic finishes can
attack and soften the plastic feet on the phone. If the feet become damaged
in this way, they can leave marks on surfaces. Swisscom Fixnet Ltd declines all
responsibility for such damage.
15