Default Settings; Using The Phone; Receiving Calls; Using The Receiver - Swisscom Top M48 User Manual

3.4

Default settings

The factory configuration of your device Top M48 / Top M58 is as follows:
Function
Language
Display contrast
Phone book
Incoming calls list
Missed calls list
Dialed numbers list
Alarm and reminders
Pause
Flash
Password
SMS inbox
SMS outbox
Incoming SMS alert
SMS number (for incoming SMS messages)
SMS call nos. 1 & 2 (for outgoing SMS messages)
Tel. no. for outgoing SMS messages (SMS)
Terminal no.
Top M58 only:
Function
Automatic answering machine
Memo
Recording time
Number of rings before answer
Answering machine message
Remote access code
16
Default
German
50 %
Empty
Empty
Empty
Empty
Off
3 sec.
100 ms
0000
Empty
Empty
On
06221000
06221000
06221000
0
Default
OFF
Empty
20 minutes (high)
6 rings
Factory default OGM 1
0000

Using the phone

4
4.1

Receiving calls

The display shows the caller's telephone number (unless blocked by
ó
the caller) and name (if stored in the phone book), the date and time.
The blue LED blinks.
ó
4.1.1

Using the receiver

Pick up the receiver.
ó
The call duration is displayed while the call is in progress.
ó
To end the call, replace the receiver.
ó
4.1.2

Using the hands-free function

Press the LOUDSPEAKER key.
ó
The call duration is displayed while the call is in progress.
ó
To end the call, press the LOUDSPEAKER key.
ó
4.1.3

Using the headset

Ensure the headset is plugged in correctly.
ó
Press the LOUDSPEAKER key.
ó
The call duration is displayed while the call is in progress.
ó
To end the call, press the LOUDSPEAKER key.
ó
4.2 Making calls in standby mode
4.2.1 Using the receiver
Pick up the receiver.
ó
Wait for a dialing tone, then dial the required number.
ó
The call duration is displayed while the call is in progress.
ó
To end the call, replace the receiver.
ó
4.2.2 Using the hands-free function
Press the LOUDSPEAKER key.
ó
Wait for a dialing tone, then dial the required number.
ó
The call duration is displayed while the call is in progress.
ó
To end the call, press the LOUDSPEAKER key.
ó
17