Detailed Operation; Preset Mode - iSP Technologies THETA PRO DSP Owner's Manual

DETAILED OPERATION:

Refer to Figures above for the hardware drawings which show the locations of
the switches, knobs, and jacks when reading the following. Refer to Figure 2 for
the signal flow diagram which shows the flow of the signal through the unit from
the input to the outputs. The following text explains the operation of the unit
organized by the software functions and parameters, but it also incorporates
explanations of the hardware functions where they are interrelated to the
software. This fusion of both domains together helps to simplify the
understanding of the unit, since everything about a single concept is contained
together. Also, many important operational details are contained in the Quick
Start section, so reading and understanding that section is essential.

PRESET MODE:

This is the default mode when the unit is first turned on. It allows direct recall of
presets by name, adjustment and programming of presets, mapping of switches
and the expression pedal, MIDI Dump and Load, and setting of Global
parameters. The other mode of the unit is SONG MODE, which will be described
later.