G: Stage Spkr Sim (Off Or On); G: Direct Out (Stereo Or Mono); G: Direct Eq (Off Or On); G: Stage Eq (Off Or On) - iSP Technologies THETA PRO DSP Owner's Manual

the threshold in all presets equally. It is useful for situations where
you are playing with a different guitar or in a different environment,
where you need a temporary change in the decimator threshold,
without having to change decimator settings within individual
presets.
b. G: STAGE OUT (STEREO or MONO): When set to MONO, the left
and right STAGE OUTs will be summed and divided by 2. This is
useful when you only have a single speaker cabinet on stage.
c. G:STAGE SPKR SIM (OFF or ON): Typically this would be set to
OFF for using a traditional 1x12, 2x12, or 4x12 guitar cabinet on
stage. But if you want to use a full range cabinet such as a vocal
wedge, or even in-ear monitors, yet still control their volume via the
STAGE OUT LEVEL on the front of the unit, setting this to ON will
route the INTELLIGENT SPEAKER™ processed output to the
STAGE OUT jacks.
d. G: DIRECT OUT (STEREO or MONO): When set to MONO, the
left and right DIRECT OUTs will be summed and divided by 2. This
is useful when you only want a mono feed to the front of house.
Note that this will also affect the phones output, since they share
the same pair of DAC channels.
e. G: DIRECT TRIM (-12 to 0 dB): This attenuates the DIRECT OUTs
to prevent input clipping on some mixers.
f. G: DIRECT EQ (OFF or ON): This turns on a stereo 3-band EQ
section on the DIRECT OUTs. Remember, this EQ curve will then
be present on all presets, and is useful for making basic corrections
to speakers and rooms.
g. G: DIR BASS (-15 to +15 dB): Consult the POST EQ function for a
detailed explanation of these 7 EQ parameters.
h. G: DIR BASS (40 to 240 Hz):
i. G: DIR MID (-15 to +15 dB):
j. G: DIR MID (88 to 6000 Hz):
k. G: DIR MID (0.1 to 2.5 OCT):
l. G: DIR TREBLE (-15 to +15 dB):
m. G: DIR TREBLE (2000 to 12.0k Hz):
n. G: STAGE EQ (OFF or ON): This turns on a stereo 3-band EQ
section on the STAGE OUTs. Remember, this EQ curve will then
be present on all presets, and is useful for making basic corrections
to speakers and rooms.
o. G: STAGE BASS (-15 to +15 dB): Consult the POST EQ function
for a detailed explanation of these 7 EQ parameters.
p. G: STAGE BASS (40 to 240 Hz):
q. G: STAGE MID (-15 to +15 dB):
r. G: STAGE MID (88 to 6000 Hz):
s. G: STAGE MID (0.1 to 2.5 OCT):
t. G: STAGE TREB (-15 to +15 dB):
u. G: STAGE TREB (2000 to 12.0k Hz):