Product Specifications; Warnings - Ednet BoomP!ll Manual

7. Reset
Short press button "3" to reset speaker
8. Charging of battery
Plug in the Micro USB cable to Micro USB slot of the speaker. Then
connect the USB port to the USB slot of PC or USB 5V charging adapter.
Charging time is approximately 1.5 hours. During the re-charging of the
battery, the red LED lights are continuously. When the speaker is fully
charged, the red LED turns off.

PRODUCT SPECIFICATIONS

 Model No.:
 Output:
 Driver size:
 Power amplifier SNR:
 Bluetooth:
Battery:

 Frequency range :
 Formats:
Product size:

 Weight:

Warnings

1. Only charge the speaker with the provided original Micro USB charging
cable.
2. Do not attempt to disassemble the speaker, it may result in short-circuit or
damage.
3. Do not drop or shake the speaker, it may break internal circuit boards or
mechanics.
4. The speaker should be kept in dry and ventilated environment, please
avoid high humidity and high temperature.
5. Batteries should not be exposed to excessive heat or direct sunlight.
6. Keep the surface of the speaker clean, but do not use organic solvents to
clean.
7. Please keep the speaker away from little children.
.
33033
3W
Φ31mm*1
≥65dB
V2.1+EDR
3.7V 300mAh Li-polymer rechargeable battery
250 Hz - 20K Hz
Mp3：8Kbps~320kbps
Φ37.3mm*H43.8mm
41g