Button Functions - Ednet BoomP!ll Manual

BUTTON FUNCTIONS

1. Power ON/OFF:
Press the button "8" at least for 3 seconds to power on the Ednet 33033
speaker. The blue and red LED flashes alternately. Press the button "8" at
least for 3 seconds to power off, when the speaker is on.
2. Play/Pause:
Short press the button "8" to pause (blue indication light keeping flashes),
and press again to continue music playback when the speaker is playing.
3. Answer/hang up call:
When a call is coming, short press button "8" to answer a call. And short
press again to hang up the call. Long press is to reject a call.
4. Shutter camera：
When speaker connected with the mobile device via Bluetooth, double-
click button "8", then you will hear a long high sound which reminds you
that the speaker is going to the "PHOTO-SELF" mode. You can open your
camera APP from your smart phone, short press to take photo. If you
wanted to close it, you only double-click button "8" again to exit and back
to music mode.
5. Volume +/-
When speaker is playing, turn right to increase the volume, and turn left to
decrease the volume.
6. Line in
Connect your Smartphone or audio device with the 3.5mm socket of the
speaker. First turn ON your Smartphone or audio device and the speaker.
Start the audio playback from your Smartphone or audio device. You can
listen to the audio playback over the speaker. To stop the audio playback,
unplug the 3.5mm cable from the speaker.
Remarks: Under playing mode of line in, press the button of play and
pause could mute.