Increasing the spacing makes the brush skip
While using a preset brush, press the [ key to decrease the brush width; press the ] key to increase the width. For hard round, soft round, and
calligraphic brushes, press Shift+[ to decrease the brush hardness; press Shift+] to increase the brush hardness.
Bristle tip shape options
For a video about bristle tips, see
Bristle tips let you specify precise bristle characteristics, creating highly realistic, natural-looking strokes. Set the following brush tip shape options
in the Brush panel:
Shape
Determines the overall arrangement of bristles.
Bristles
Controls overall bristle density.
Length
Changes bristle length.
Thickness
Controls the width of individual bristles.
Stiffness
Controls bristle flexibility. At low settings, brush shape deforms easily.
To vary stroke creation when using a mouse, adjust the stiffness setting.
Spacing
Controls the distance between the brush marks in a stroke. To change the spacing, type a number or use the slider to specify a
percentage of the brush diameter. When this option is deselected, the speed of the cursor determines the spacing.
Angle
When painting with a mouse, determines the brush tip angle.
Brush preview
Shows brush tip that reflects changes to settings above, as well as current pressure and stroke angle. Click the preview window
to see the brush from different sides.
Note:
Bristle Brush previews require OpenGL. (See
Erodible tip options | CS6
Erodible tip brushes behave similar to pencils and crayons, and wear down naturally as you draw. You can see the amount of wear with the Live
Brush Tip Preview to the upper left of the image.
Size
Controls the size of the brush. Enter a value in pixels or drag the slider.
Softness
Controls the rate of wear. Enter a value in percentage or drag the slider.
Shape
Controls the shape of the tip. Choose from a variety of tip options.
Sharpen Tip
Returns the tip to the original sharpness.
Spacing
Controls the distance between the brush marks in a stroke. To change the spacing, type a number or use the slider to specify a
percentage of the brush diameter. When this option is deselected, the speed of the cursor determines the spacing.
Brush preview
Shows brush tip that reflects changes to settings above, as well as current pressure and stroke angle. Click the preview window
to see the brush from different sides.
Airbrush tip options | CS6
Airbrush tips replicate spray cans with a 3D conical spray. With a stylus, you can alter the spread of sprayed strokes by changing pen pressure.
Size
Controls the size of the brush. Enter a value in pixels or drag the slider.
Hardness
Controls the size of the brush's hard center.
Distortion
Controls the distortion to apply to the spray of paint.
www.adobe.com/go/lrvid5009_ps_en
Enable OpenGL and optimize GPU
settings.)
To the top
To the top
To the top