Using The Powerbank; Using The Torch Function - MAXTEK 70148 User Manual

Using the Powerbank

To charge a device, check the power requirements of your device
before using the USB charge port.
Use the charge cable supplied by the manufacturer for your
chosen device to charge it. Connect the cable to the device
using the USB port marked 'OUT'. This port will charge most
mobile phones, tablets and portable devices that require a 1 amp,
5V charge.
Once the device is connected the charge Icon will appear on your
device confirming the powerbank is supplying a charge.

Using the Torch Function

This powerbank is equipped with an LED torch with two brightness
levels function.
To use the torch press the 'TORCH' button located on the front
panel to turn on the LED torch. Press the 'TORCH' button again to
lower the brightness and finally press the 'TORCH' button a third
time to turn the LED touch off.
6
After Sales Support
UK/N.IRELAND HELPLINE N
REP.IRELAND HELPLINE N
O
WEBSITE:
EMAIL: enquiries@quesh.co.uk
: 01270 508538
O
: 1800 995 036
www.quesh.co.uk