Charging The Powerbank - MAXTEK 70148 User Manual

Charging the Powerbank

Disconnect the devices connected to the USB ports and make sure
the LED light is off. Open the dust cover and connect the charge
cable supplied to the micro USB port marked 'IN' and the other end
to USB 2.0 port on a Laptop or PC.
Each of the blue LED indicators represent available power levels,
25%, 50%, 75% and 100%. The 25% LED is at the bottom nearest
the battery icon. The corresponding LED will flash as it recharges.
Once complete you will have 4 solid blue LED's.
When in use the last LED will start to flash when power levels drop
to below 10%.
You can check the power level by pressing the 'POWER' button.
A complete charge will take approximately 6 hours.
Warning:
Do not attempt to charge the powerbank using a USB mains
adaptor. This will damage the powerbank if used
After Sales Support
UK/N.IRELAND HELPLINE N : 01270 508538
O
REP.IRELAND HELPLINE N : 1800 995 036
O
WEBSITE: www.quesh.co.uk
5
EMAIL: enquiries@quesh.co.uk