Toshiba sd-4800 Owner's Manual page 56

Function setup
Function setup
Customizing the Function Settings (continued)
Setting details
(Continued)
C (Center) Speaker
Off: When center speaker is not connected.
On: When you connect center speaker.
S (Surround) Speaker
Off: When surround speakers are not connected.
On: When you connect surround speakers.
Subwoofer
Off: When a sub woofer is not connected.
On: When you connect a sub woofer.
Note
Depending on the sound in a DVD audio disc,
speakers may output each sound of recorded
channels, regardless of your settings.
Adjusting the delay time:
When enjoying 5.1ch surround playback, it is ideal
to choose a listening position that is the same
distance from each speaker. By adjusting the
delay time of the center/surround speakers, you
can virtually create an ideal listening environment
(as if the center/surround speakers were at their
ideal locations respectively as below.)
FL
SW
SL
Center Channel Delay
0msec: When Df equals Dc.
1msec: When (A) is approx. 34 cm (13 inch)
2msec: When (A) is approx. 68 cm (27 inch)
3msec: When (A) is approx. 102 cm (40 inch) . . .
*(A) = Df – Dc
Get your optimum value (0, 1, 2 . . . 5)
dividing (A) by 34.
Downloaded From DvDPlayer-Manual.com Toshiba Manuals
60
Ideal location of a
center speaker
(A)
FR
Dc
All speakers should
Df
be located within a
circle with a radius
Ds of Df.
(B)
SR
Ideal location of a
surround speaker
Surround Channel Delay
0msec: When Df equals Ds.
1msec: When (B) is approx. 34 cm (13 inch)
2msec: When (B) is approx. 68 cm (27 inch)
3msec: When (B) is approx. 102 cm (40 inch) . . .
*(B) = Df – Ds
Get your optimum value (0, 1, 2 . . . 15)
dividing (B) by 34.
Note
Depending on the sound in a DVD audio disc, the
DVD player may adjust delay time as "0msec,"
regardless of your delay time settings.
3) Select "Test Tone" and press the ENTER
button.
The DVD player outputs a test signal to each
speaker when it is in stop mode. When playing
a DVD video disc, it substitutes the current
sound for the test signal.
Press the / buttons to select the receiving
speakers, and adjust the volume of each
speaker at the same level by pressing the
buttons.
If all the volume levels cannot be equalized,
adjust them on the amplifier.
Note
Depending on the disc, 6 channel sounds may not be
output via the 5.1 CH SURROUND AUDIO OUT jacks.
/