Configuring The Gateway - BinTec R232a Reference Manual

2 Quick Install Guide
20

2.5.2 Configuring the Gateway

Your gateway can be configured quickly and easily with the Express Setup Wizard.
Fig. 8: Express Setup Wizard - Initial Screen
If you have already created a configuration using the Express Setup Wizard, the Express
Setup Wizard can use the preset values. You will be informed about this possibility during
configuration.
Start the configuration of your gateway as follows:
(1) Enter http://192.168.0.254/wizard or https://192.168.0.254/wizard in
your web browser's address line. Follow the instructions.
Optional:
(1) On the bintec bintec Companion CD, choose Installation, and click the Configure
Device button.
(2) Then follow the instructions to find a free IP address for the device. Click Allocate
Automatically... or enter the IP address and network mask you have defined.
(3) Start the configuration withComplete.
You can carry out the configuration in Quick or Advanced mode. If you are not very famili-
ar with networking technologies, choose Quick. Your device is ready for operation when
you have completed the configuration.
You can select from the following configuration items:
Funkwerk Enterprise Communications GmbH
bintec R200 Series