Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TimeIPS BAR-USB-BT
Summary of Contents for TimeIPS BAR-USB-BT
- Page 1 BAR-USB-BT Handheld Wireless Barcode Scanner Installation Guide...
-
Page 2: Table Of Contents
Table of Contents Overview........................3 Locate The Barcode Scanner..................4 Connect The Cable......................5 Configure Badge Numbers..................6 Train Employees ......................7 Job Code Labels ......................7 Scanning into or Changing Jobs..................7 Technical Support......................8 Specifications......................8 Page 2 http://support.timeips.com 316.264.1600 TimeIPS... -
Page 3: Overview
Compatible with all TimeIPS systems with available USB port ● Reads barcode identification badges ● Uses code 39 Badges and code 128 Jobs ● Base plugs into a USB connector on the back of the TimeIPS system or ● LCD display TimeIPS http://support.timeips.com 316.264.1600 Page 3... -
Page 4: Locate The Barcode Scanner
Locate The Barcode Scanner Failure to locate and maintain the BAR-USB-BT unit with the following guidelines will void your warranty. Mount the unit in a dry, indoor location with controlled ● temperature and humidity. Do NOT use the unit in any location where rapid temperature changes may cause condensation. -
Page 5: Connect The Cable
Connect The Cable Connect the USB cable to a USB port on the back of a TimeIPS system or LCD display unit. If needed, a USB hub or extension cable can be used to extend the cable length. Never use an extension cable if the total cable length will exceed 10 feet. -
Page 6: Configure Badge Numbers
IMPORTANT: We recommend your barcodes be at least 4 digits long to be recognized by the BAR-USB-BT scanner. Barcodes with 3 or fewer digits may not scan. Prior to setting up any new employees, please consider if the default... -
Page 7: Train Employees
2. Make the job code a minimum of 4 digits and a maximum of 12 digits long Scanning into or Changing Jobs When scanning into or changing jobs always scan the job barcode first and then your badge number. TimeIPS http://support.timeips.com 316.264.1600 Page 7... -
Page 8: Technical Support
Approximate dimensions: in (200mm ) x 3in (75mm) x 6in (150mm) This manual is copyright 2004-2012 TimeIPS, Inc. TimeIPS and the TimeIPS logos are registered trademarks of TimeIPS, Inc. All other trademarks are the property of their respective owners. Thank you for reading this manual carefully. If you noticed errors, have any suggestions or found typographical problems, we want to know! Please send an email with the version code below and your feedback to documentation@timeips.com We appreciate your time.
Need help?
Do you have a question about the BAR-USB-BT and is the answer not in the manual?
Questions and answers