Selecting A Light Source - Celestron microspin 44114 Instruction Manual

Hide thumbs Also See for microspin 44114:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

SELECTING A LIGHT SOURCE

• This digital microscope contains an upper (6) and lower (4) LED
illuminator. Once connected to your computer, one of the lights will
turn on. Press the illuminator selector switch (5) to toggle between
the illuminators.
SELECTING A MAGNIFICATION POWER
• The objective wheel (2) can be rotated clockwise or counter-
clockwise. Rotate the wheel until the desired objective is directly
over the specimen and you feel a 'click. ' This means the objective
lens is correctly aligned.
FOCUSING
• The Focus knob (8) can be rotated clockwise or counter-clockwise.
Rotate the focusing knob (8) while viewing the streaming image on
the computer monitor. Stop when the image is in focus.
NOTE:
Make sure that the objective is clear from obstructions and does not hit the specimen slide
while lowering the objective's wheel during focusing.
5
I
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents