Chapter 2: Safety Instructions - Night Owl CAM-IP-HDW User Manual

CHAPTER 2: SAFETY INSTRUCTIONS

Use the provided power adaptor.
•
Do not use this product with a power source that applies more than the
specified voltage.
Never insert metal into the camera case or its openings.
•
Inserting metal into the camera case may cause electric shock.
Do not expose the camera to rain or use near water.
•
If the camera accidentally gets wet, unplug it and contact technical support
immediately.
Keep product surfaces clean and dry.
•
To clean the outside case of the camera, use a lightly dampened cloth.
Do not use cleaning solutions or solvents.
Do not install near any heat sources.
•
Do not install the camera near any heat sources such as stoves, heat
registers, radiators, or electronics (including amplifiers) that produce
heat.
Unplug the camera when moving it.
•
Make sure that the camera is unplugged before you move it. When moving
this device, be sure to handle it with care.
Do not attempt to remove the top cover.
•
If you observe any abnormal operation, unplug the camera immediately and
contact technical support. Do not attempt to open the camera to diagnose
the cause of the problem.
You may be subjected to severe electrical shock if you
remove the cover of the camera.
NightOwlSP.com
4