Samsung UA65KS9500R E-Manual page 58

Analogue Clean View
●
Auto Motion Plus
●
" When LED Clear Motion
" If LED Clear Motion
Film Mode
●
"
This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i).
HDMI UHD Color
●
" If you set the HDMI connection to On, the TV turns off and then on automatically.
" The HDMI connection with
while the HDMI connection with
input signals. For more information, refer to "Supported Resolutions for UHD Input Signals".
"
For the SUHD models, each HDMI connection can be individually optimised for
UHD models, make sure to connect to the HDMI IN 1 port of the TV.
" When you connect the TV to the external device that supports only UHD 24 or 30 Hz frequency or any FHD
frequency, the HDMI UHD Color function may not be available. In this case, set
HDMI Black Level
●
" This function is only available when the input signal, connected to the TV via an HDMI connector, is set to
RGB444.
Dynamic Contrast
●
Colour Tone
●
" Cool and Standard
" Colour Tone is only available when the TV is connected to a computer via an HDMI-to-DVI cable.
White Balance
●
Gamma
●
RGB Only Mode
●
Colour Space
●
Reset Picture
●
Smart LED
●
"
This function is not available on certain models in specific geographical areas.
is set to On, the screen appears darker than when it is Off.
is set to On, at 60Hz video signal, the screen may flicker.
HDMI UHD Color
HDMI UHD Color
are only available when
set to Off supports up to UHD 50P/60P 4:2:0 input signals,
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2
Picture Mode is set to Dynamic.
HDMI UHD Color. For the
HDMI UHD Color to Off.