Page 1 E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________ Serial No. _____________...
Page 2: Table Of Contents
Contents • Using the Media Contents Channel Menu Preference Features • Connecting a USB Device • Using the INFO button • Setting the Network • Connecting to the PC through network (Now & Next guide) • Setting the Time • Recorded TV •...
Page 3: Channel Menu
Channel Menu ❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. ●...
Page 4: Using The Channel Menu
❑ Using the Channel Menu Press the SMART HUB button to select the Search Your Video Samsung Apps menu you want to use. Each screen will be displayed. Connect to the Internet and enjoy a variety of contents throuth Smart Hub.
Page 5: Schedule Manager
Using Channel View (Sche. Mgr) : Displays the a Red Guide Fri, 1 Jan 2:10 am DTV Air 05.1 Globo HD Schedule Manager. TELA QUENTE (HD) 10:05 pm - 12:10 pm Green (-24 Hours): Viewing the list DESVENTURAS EM SERIE (HD) Channel View - All Channels of programmes to be broadcasted Today...
Page 6 Blue Mode): Select the type of channels you want to display on the Channel View window. `(Information): Displays details of the selected programme. (Page): Move to next or previous page. (Watch / Schedule): When selecting the current programme, you can watch the selected programme.
Page 7 Schedule Manager ■ SMART HUB → → Schedule Manager ENTERE You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function.
Page 8 3. Press the buttons to set the Channel, Repeat Start Time. ● Channel: Select the desired channel. ● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri Everyday to set at your convenience. If you select Manual, you can set the day you want. mark indicates the date is selected.
Page 9 On the screen, you can change or cancel a reserved Information information. ● Schedules: Cancel a show you have reserved to watch. Cancel ● Edit: Change a show you have reserved to watch. ● Return: Return to the previous screen. Only memorised channels can be reserved.
Page 10: Using The Timer Recording (Digital Channels Only)
❑ Using the Timer Recording (digital channels only) Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. button also controls recording. � 1. Press the button to select Manager.
Page 11 3. Press the button to select the Timer Recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. A USB storage device cannot record until it completes the Device Performance Test.
Page 12 Playing Recorded TV Programme (in Schedule Manager) When the TV finishes recording for scheduled programmes, you can check result list of recorded programme. 1. On the Schedule Manager screen, select the Result List by using remote control. The screen will appear. Result List 2.
Page 13 Channel List ■ Channel List You can view all the channel searched. TV #6 When you press the CH LIST button on No Information TV #10 TV #11 the remote control, Channel List screen 10-1 TV #12 10-2 TV #13 will be displayed at once.
Page 14 ● (Ch. Mode / Channel): Move to the type of channels you want to display on the screen. (All, Analogue, TV, Radio, Data/Other, Channel List Favourites 1~5) ● (Watch / Information): Watches the channel you select. / Displays details of the selected programme. ●...
Page 15 3. Press the or d buttons to select the desired program, and then press the INFO button. 4. Press the or r buttons to select Viewing, and then press the Timer ENTERE button. 5. Press RETURN twice to exit. If you want to cancel Timer Viewing, follow Steps 1 through 3, and then select Cancel Schedules.
Page 16: Using The
❑ Using the Channel SMART HUB → → Channel ENTERE Channel ■ Delete added channels or set favourites Channel All Channels channels and use the programme guide for 10-1 TV #13 TV #6 digital broadcasts. Select a channel in the 10-2 TV #14 Channels, Analogue, TV,...
Page 17 ● Sort: Change the list ordered by channel name or channel number. ● Edit Mode: Delete channels assigned to Favourites. Refer to “Using the Favourites Channels” for details on how to assign a channel to Favourites. ● Select All: Select all the channels. ◀...
Page 18 Using the TOOLS button with the Channel ● Edit Favourites: Set channels you watch frequently as favourites. 1. Select the Edit Favourites, then press the ENTERE button. 2. Press the ENTERE button to select Favourites 1-5, then press the button. One favourites channel can be added in several of favourites channels among Favourites...
Page 19 NOTE ● This function is available only when the Channel Lock is set to On. ● The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ● Edit Channel Name (analogue channels only): Assign your own channel name.
Page 20 ● (digital channels only): View details on the programme Upcoming Programme being aired on a selected digital channel. ● Delete: Delete a channel to display the channels you want. ◀ ▶ English...
Page 21 Channel Status Display Icons Icon Operations An analogue channel. A channel selected. A channel set as a Favourites 1-5. A locked channel. ◀ ▶ English...
Page 22: Using Favourites Channels
❑ Using Favourites Channels Favourites ■ Shows all favourites channels. ● Edit favourites t: You can set the selected channels to desired Favourites group. The “F” symbol wil be displayed and the channel will be set as a Favourites. ◀ ▶...
Page 23 1. On the Channel screen, select a channel and press the TOOLS button. If you want to add multiple channels, use the Edit Mode menu in the top right corner of the Channel screen. 2. Select Edit favourites in the TOOLS menu, and then press the ENTERE button.
Page 24: Memorising Channels
❑ Memorising Channels → → MENUm Channel ENTERE Country ■ The PIN input screen appears. Enter your 4 digit PIN number. Select your country so that the TV can correctly auto-tune the broadcasting channels. ◀ ▶ English...
Page 25 Auto Tuning ■ Scans for a channel automatically and stores in the TV. Select the channel search option to memorise. Press the l or r button to select Digital & Analogue, Digital or Analogue, and then press ENTERE. A check appears on your selection. Select Next, and then press the ENTERE button. The channel search will start.
Page 26 Manual Tuning ■ Scans for a channel manually and stores in the TV. If a channel is locked using the Channel Lock function, the PIN input window appears. This function may not be supported depending on the region. ● Digital Channel Tuning: Scans for a digital channel.
Page 27 ● Analogue Channel Tuning: Scans for a analogue channel. 1. Press the button to select New. 2. Set the Programme, Colour System, Sound System, Channel Search. 3. Press the button to select Store. When scanning has finished, a channel is updated in the channel list. ◀...
Page 28 Channel mode ● (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ● (aerial channel mode) / (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.
Page 29: Other Features
❑ Other Features → → MENUm Channel ENTERE Transfer Channel List ■ The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. ● Import from USB: Import channel list from USB.
Page 30 Fine Tune ■ (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
Page 31: Basic Features
Basic Features ❑ Changing the Preset Picture Mode → → → MENUm Picture Picture Mode ENTERE Picture Mode ■ Select your preferred picture type. When connecting a PC, you can only make changes to the Standard Entertain. ● Dynamic: Suitable for a bright room. ◀...
Page 32: Adjusting Picture Settings
❑ Adjusting Picture Settings → → MENUm Picture ENTERE Backlight Cell Light Contrast / Brightness Sharpness ■ for LED TV for PDP TV Colour Tint (G/R) Your television has several setting options for picture quality control. In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is...
Page 33: Changing The Picture Size
❑ Changing the Picture Size → → → MENUm Picture Screen Adjustment ENTERE Screen Adjustment ■ ● Picture Size t: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
Page 34 – Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. Adjusts the Zoom Position by using u, button. – 4:3: The default setting for a movie or normal broadcasting. Do not watch in format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty.
Page 35 – Smart View 1: Reduces the 16:9 picture by 50%. for LED TV – Smart View 2: Reduces the 16:9 picture by 25%. for LED TV The picture size can vary depending on the input resolution when content is played using Videos under Smart...
Page 36 NOTE ● When Double (à, Œ) mode has been set in (Picture-in-Picture), the Picture Size cannot be set. ● Depending on the input source, the picture size options may vary. ● The available items may differ depending on the selected mode. ●...
Page 37 ● HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) ● Settings can be adjusted and stored for each external device you have connected to an input on the TV. Input Source Picture Size ATV, EXT Auto Wide, 16:9, Wide Zoom, Zoom, AV,Component(480i,480p,576i,576p) DTV(720p,1080i,1080p)
Page 38 ● 4:3 Screen Size (16:9 / 4:3) (New Zealand, Wide Zoom Zoom Singapore only): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Not available in PC, Component HDMI...
Page 39: Changing The Picture Options
❑ Changing the Picture Options Advanced Settings ■ → → → MENUm Picture Advanced Settings ENTERE (Advanced Settings are available in Standard Movie mode) You can adjust the detailed setting for the screen Advanced Settings including colour and contrast. Black Tone Dynamic Contrast Medium When connecting a PC, you can only make...
Page 40 ● Black Tone (Off / Darkest): Select the black level to adjust the Dark Darker screen depth. ● Dynamic Contrast (Off / High): Adjust the screen contrast. Medium ● (-2~+2) : Increase the brightness of dark images. Shadow Detail for LED TV ●...
Page 41 ● RGB Only Mode (Off Green / Blue): Displays the Red, Green Blue colour for making fine adjustments to the hue and saturation. ● Colour Space (Auto Native / Custom): Adjust the range of colours available to create the image. To adjust Colour, Red, Green, and Reset, set Blue...
Page 42 ● 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Available when the picture mode is set to and when the external Movie input is set to all input. Some external devices may not support this function.
Page 43 ● Tone: Emphasize pink “Flesh Tone.” Flesh ● Edge Enhancement (Off / On): Emphasize object boundaries. ● Motion Lighting (Off / On) : Reduce power consumption by brightness control. is available in mode. Motion Lighting Standard Movie When changing a setting value of Backlight for LED TV Cell Light...
Page 44 ● xvYCC (Off / On): Setting the mode on increases detail and colour xvYCC space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks. Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
Page 45: Picture Options
Picture Options ■ → → → MENUm Picture Picture Options ENTERE When connecting a PC, you can only make changes Picture Option to the Colour Tone. Colour Tone Standard Digital Noise Filter Auto ● Colour Tone (Cool Standard Warm1 / Warm2) MPEG Noise Filter Auto Warm1...
Page 46 ● Digital Noise Filter (Off Medium High Auto Auto Visualisation): When the broadcast signal is weak, some static and ghosting may appear. Select one of the options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays the intensity of the current signal and defines the screen noise filter.
Page 47 ● MPEG Noise Filter (Off Medium High / Auto): Reduces MPEG noise to provide improved picture quality. ● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. Available only in HDMI mode (RGB signals). ●...
Page 48 ● Motion Plus (Off Clear Standard Smooth Custom / Demo) for LED TV : Removes drag from fast scenes with a lot of movement to provide a clearer picture. The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus...
Page 49 Blur Reduction: Adjusts the blur reduction level from video sources. Judder Reduction: Adjusts the judder reduction level from video sources when playing films. Reset: Reset the custom settings. Reset Picture (Yes / No) ■ Resets your current picture mode to its default settings. ◀...
Page 50: Setting Up The Tv With Your Pc
❑ Setting up the TV with Your PC Set the input source to PC. Auto Adjustment ■ → → → MENUm Picture Auto Adjustment ENTERE Adjust frequency values/positions and fine tune the settings automatically. Not available when connecting with an HDMI to DVI cable. ◀...
Page 51 PC Screen Adjustment ■ → → → → MENUm Picture Screen Adjustment PC Screen Adjustment ENTERE ● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again.
Page 52 Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
Page 53 4. Navigate to the “Settings” tab on the display dialog-box. ● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] ● If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
Page 54: Changing The Preset Sound Mode
❑ Changing the Preset Sound Mode → → → MENUm Sound Sound Mode ENTERE Sound Mode ■ ● Standard: Selects the normal sound mode. ● Music: Emphasizes music over voices. ● Movie: Provides the best sound for movies. ● Clear Voice: Emphasizes voices over other sounds.
Page 55: Adjusting Sound Settings
❑ Adjusting Sound Settings → → → MENUm Sound Sound Effect ENTERE Sound Effect ■ ● SRS TruSurround HD (Off / On) (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ◀...
Page 56 ● SRS TruDialog (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ● Headphone: You can hear virtual 5.1ch surround sound over the SRS CS headphones.
Page 57 ● Equalizer Adjusts the sound mode (standard sound mode only). – Balance L/R: Adjusts the balance between the right and left speaker. – 100Hz 300Hz 1kHz 3kHz 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. – Reset: Resets the equalizer to its default settings. ◀...
Page 58 3D Audio (Off Medium / High) ■ 3D audio technology provides the immersive sound corresponding to the pop-up effect of 3D video by audio depth control in perspective. Available in only when watching 3D image. ◀ ▶ English...
Page 59 ■ Broadcast Audio Options ● Audio Language (digital channels only) Change the default value for audio languages. The available language may differ depending on the broadcast. ● Audio Format (digital channels only) ◀ ▶ When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver.
Page 60 ● Audio Description (not available in all locations & digital channel only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. Audio Description (Off / On): Turn the audio description function on or off. Volume: Adjust the audio description volume.
Page 61 Additional Setting ■ ● DTV Audio Level (MPEG / HE-AAC) (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. According to the type of broadcast signal, MPEG / HE-AAC can be...
Page 62 ● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Format: You can select the Digital Audio output (SPDIF) format. Audio The available Digital Audio output(SPDIF) format may differ depending on the input source Audio Delay: Correct audio-video sync problems, when watching TV or video,...
Page 63 ● Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.
Page 64 Speaker Settings ■ ● Speaker Select (External Speaker Speaker) A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. When Speaker Select is set to External Speaker, the volume and MUTE...
Page 65 ● Auto Volume (Off Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. To use the volume control of a connected source device, set Auto Volume to Off.
Page 66: Selecting The Sound Mode
❑ Selecting the Sound Mode When you set to f-g, the current sound mode is displayed on the screen. Dual Audio Type Dual 1 / 2 Dual 1 / 2 Mono MONO Automatic change Stereo ↔ STEREO MONO A2 Stereo Dual DUAL ↔...
Page 67 If the stereo signal is weak and an automatic switching occurs, then switch to the mono. Only activated in stereo sound signal. Only available when the source is set to TV. Input ◀ ▶ English...
Page 68: Preference Features
Preference Features ❑ Setting the Network ■ Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways: ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable.
Page 69 ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. The Modem Port on the Wall TV Rear Panel...
Page 70 ● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.
Page 71 ● If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually.
Page 72 Network Settings ■ → → → MENUm Network Network Settings ENTERE Set the network connection to use various Internet services such as SMART HUB, AllShare and perform software upgrade. Network Status ■ → → → MENUm Network Network Status ENTERE You can check the current network and Internet status.
Page 73 ■ → → → MENUm Network AllShare Settings ENTERE Selects whether to use media functions on the network. SWL(Samsung Wireless Link) ■ → → → MENUm Network SWL(Samsung Wireless Link) ENTERE You can connect TV to wireless mobile device easily. For details on set up options, refer to the “Wired Network Settings”...
Page 74 Network Setup (Auto) ■ Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: How to set up automatically 1. Go to Network Settings screen.
Page 75 If it fails to set automatically, check the Network Setting connection of LAN port. Wiress network and Internet connection completed. MAC Address 00:12:fb:2b:56:4d If you cannot find network connection IP Address 192.168.11.4 Subnet Mask 255.255.255.0 Gareway 192.168.11.1 Retry values or if you want to set connection SEC_LinkShare DNS Server 192.168.11.1 IP Setting...
Page 76 Network Settings (Manual) ■ Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1.
Page 77 How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set IP Settings up automatically” procedure. IP Mode Manual IP Address 0 . 0 . 0 . 0 2.
Page 78 5. Enter the Gateway, and values. Use IP Address, Subnet Mask, DNS Server the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7.
Page 79 ■ Connecting to a Wireless Network You can connect your TV to your LAN through a standard wireless router or modem. The LAN Port on the Wall Wireless IP sharer (router having DHCP server) ◀ ▶ LAN Cable English...
Page 80 Samsung Wireless LAN adapter supports the IEEE 802.11a/b/g and ncommunication protocols. Samsung recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly. NOTE ● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem).
Page 81 ● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. ●...
Page 82 ● Ensure the TV is turned on before you connect the Samsung Wireless LAN a dapter. ● Connection Methods: You can setup the wireless network connection on six ways. – Auto Setup (Using the Auto Network Search function) – Manual Setup –...
Page 83 Network Setup (Auto) ■ Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network.
Page 84 How to set up automatically 1. Go to Network Settings screen. To enter it, Network Setting follow the directions of Network Settings. Select a network connection type. Wired 2. Select the Wireless. Wireless (general) Previous WPS(PBC) Set up wireless network by Next selecting your access point.
Page 85 5. If the screen pop-up appears, go to step 6. If you select the wireless Security router which does not have security, go to step 10. 6. If the wireless router has security, enter the Security key(Security or PIN), then select Next.
Page 86 7. The network connection screen appears, and network setting is done. If it fails to set Security key(Security or PIN), select Reset Settings. If you want to set connection manually, select the Settings. Refer to following “How to set up manually”. ◀...
Page 87 Network Setup (Manual) ■ Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1.
Page 88 How to set up manually To set up your TV’s cable network connection IP Settings manually, follow these steps: IP Mode Manual IP Address 0 . 0 . 0 . 0 1. Follow Steps 1 through 2 in the “How to set Subnet Mask 0 .
Page 89 5. Enter the Gateway, and values. Use IP Address, Subnet Mask, DNS Server the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7.
Page 90 Network Setup (WPS(PBC)) ■ How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow Network Setting these steps: Select a network connection type. Wired 1. Go to Network Settings screen. To enter it, Wireless (general) Previous WPS(PBC) Connect to the access point follow the directions of...
Page 91 Network Settings (One Foot Connection) ■ One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot(25cm) from samsung TV. If your wireless router does not support Connection, you One Foot must connect using one of the other methods.
Page 92 10 3. Place the wireless router in parallel with the inches (25 cm) of your TV. Samsung Wireless LAN adapter giving a ● The displayed image may differ depending on the model. gap no larger than 25cm.
Page 93 One Foot Connection again, reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods. 4. The network connection screen appears, and network setting is done.
Page 94 HUB, the AP (access point) must be connected to SMART the wireless network. If a Samsung Wireless LAN Adapter is connected to the USB 2 port, the network may not operate normally. We recommend connecting it to the USB 1 ◀...
Page 95 Wireless LAN Adpater to the USB 1 (HDD) port. How to connect Samsung Wireless Link For the procedures to establish a connection, refer to the following: ◀ ▶ 1. Connect your TV to Samsung Wireless LAN Adapter as described in the previous section. English...
Page 96 3. Use the button to select Link), and then SWL (Samsung Wireless press the ENTERE button. 4. Select SWL (Samsung Wireless Link) and press the ENTERE button to turn it On. 5. Select Connect SWL by using the button and press the ENTERE button.
Page 97 6. If the “Press the WPS(PBC) button on the device that supports WPS(PBC) seconds.” message appears, press the PBC button on the device within 120 to connect. For more information, refer to the wireless network setup manual of the device to be connected. 7.
Page 98 The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider. If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics at 1-800-SAMSUNG. English...
Page 99: Setting The Time
❑ Setting the Time → → → MENUm System Time ENTERE Time ■ ● Clock: Setting the clock is for using various timer features of the TV. The current time will appear every time you press the INFO button. If you disconnect the power cord, you have to set the clock again. –...
Page 100 Manual: Set the current time manually. Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Clock Set: Set the Date and Time. Available only when Clock Mode is set to Manual.
Page 101 Using the Sleep Timer → → → → MENUm System Time Sleep Timer ENTERE ● Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). To cancel Timer, select Off. Sleep ◀...
Page 102 Setting the On / Off Timer → → → MENUm System Time ENTERE ● On Timer 1 On Timer 2 On Timer On Timer 1 Three different on timer settings can be Setup made. You must set the clock first. Setup: Select Off, Once, Everyday, Time...
Page 103 Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select...
Page 104 NOTE ● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. ● When there is only one photo file in the USB, the Slide Show will not play.
Page 105 ● Off Timer 1 Off Timer 2 Off Timer Off Timer 1 Three different off timer settings can be Setup made. You must set the clock first. Setup: Select Off, Once, Everyday, Time 12:00 Mon~Fri, Mon~Sat, Sat~Sun Manual set at you convenience. If you select Manual, Close you can set up the day you want to activate ●...
Page 106: Locking Programme
❑ Locking Programme → → MENUm System ENTERE Security ■ The PIN input screen appears before the setup screen. ● Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using Change PIN option. ● Channel Lock (Off / On): Lock channels in Channel menu, to prevent...
Page 107 ● Programme Rating Lock (Allow All Channel numbers): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed. – Allow All: Unlock all TV ratings. The items of Parental Lock differs depending on the country.
Page 108 How to watch a restricted channel If the TV is tuned to a restricted channel, the Programme Rating Lock will block it. The screen will go blank and the following message will appear: This channel is blocked by Lock. Please enter the PIN to Programme Rating unblock.
Page 109: Economical Solutions
❑ Economical Solutions Eco Solution ■ → → → MENUm System Eco Solution ENTERE ● Energy Saving (Off Medium High Picture Off) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on.
Page 110 ● Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room. If you adjust the Light, the will be set to Off. Backlight Cell Eco Sensor : When is On, Min Backlight Min Cell Light...
Page 111 ● No-Signal Power Off (Off min): To avoid unnecessary 15 min 30 min energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. Disabled when the PC is in power saving mode. ●...
Page 112: Other Features
❑ Other Features → → MENUm System ENTERE Language ■ ● Teletext Language: Set a desired language for teletext. English is the default in cases where the selected language is unavailable in the broadcast. ● Preference (Primary Audio Language / Secondary Audio Language / ◀...
Page 113 Subtitle ■ Use this menu to set the Subtitle mode. ● Subtitle (Off / On): Switches subtitles on or off. ● Mode (Normal Hearing Impaired): Sets the subtitle mode. ● Subtitle Language: Sets the subtitle language. If the programme you are watching does not support the Hearing Impaired function, Normal...
Page 114 Digital Text (Disable / Enable) ■ (Australia, New Zealand only) If the programme broadcasts with digital text, this feature is enabled. Auto Protection Time (Off 2 hours 4 hours 8 hours hours) ■ for LED TV If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Page 115 Screen Burn Protection ■ for PDP TV To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. ● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.
Page 116 value may differ depending on the monitor size (inches) and Pixel Shift mode. This function is not available in the Screen Fit mode. ● Auto Protection Time (Off hour): If the screen 10 min 20 min 40 min remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
Page 117 The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. Press any key on the remote control to cancel this feature. Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both...
Page 118 General ■ ● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NOTE ● Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode...
Page 119 ● is not available when the input source is set to TV or PC. Game Mode ● After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ● is On: Game Mode – Picture mode is set to Standard...
Page 120 ● BD Wise (Off / On): Provides the optimal picture quality for Samsung DVD, Blu- ray and Home Theatre products which support Wise. When BD Wise turned On, the picture mode is automatically changed to the optimal resolution. Available when connecting Samsung products that support BD Wise through a HDMI cable.
Page 121 The colour of light may very depending on the model. ● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. ● Name: Sets the TV name so you can find it easily on a mobile device.
Page 122 Anynet+(HDMI-CEC) ■ For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions. ◀ ▶ English...
Page 123 DivX® Video On Demand ■ Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using My Contents, the registration is completed. For more information on DivX®...
Page 124 Network Remote Control (Off / On) ■ Turn on/off or give permission to Samsung mobile phones devices. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual. ◀ ▶ English...
Page 125: Picture In Picture (Pip)
❑ Picture In Picture (PIP) → → → MENUm System ENTERE ■ You can watch the TV tuner and one external video source simultaneously. (Picture-in-Picture) does not function in the same mode. NOTE ● When Double (Œ, à) mode has been set in PIP, the Picture Size cannot ◀...
Page 126 ● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. ● While SMART HUB are in operation, the function cannot be used. ● The PIP function is not available in mode.
Page 127 ● PIP (Off / On): Activate or deactivate the PIP function. ● Channel: Select the channel for the sub-screen. ● Size (ã / Œ): Select a size for the sub-picture. õ à ● Position (ã / œ): Select a position for the sub-picture. –...
Page 128: Support Menu
❑ Support Menu → → MENUm Support ENTERE e-Manual ■ You can read the introduction and instructions about the TV features stored in your For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual. ◀...
Page 129 Self Diagnosis ■ Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ● Picture Test (Yes / No): Use to check for picture problems. ● Sound Test (Yes / No): Use the built-in melody sound to check for sound problems.
Page 130 Adjust your antenna to increase signal strength. ● Troubleshooting: If the TV seems to have a problem, refer to this description. If none of these troubleshooting tips apply, contact the Samsung customer service centre. ◀ ▶...
Page 131 Software Upgrade ■ can be performed via a broadcasting signal or by network Software Upgrade connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device. ◀ ▶ English...
Page 132 USB: Insert a USB drive containing the TV Rear Panel firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are completed. The TV will be turned off and on ●...
Page 133 ● Online: Upgrade the software using the Internet. First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Connection” instructions. If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
Page 134 ● Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. If the software was changed, existing software is displayed. ● Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time.
Page 135 Contact Samsung ■ View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. ◀ ▶ English...
Page 136: Advanced Features
■ This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG-3100GB, SSG-3300GR, SSG-3300CR, SSG-3700CR) to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.
Page 137: Viewing Tv Using The 3D Function
❑ Viewing TV using the 3D function → → → MENUm Picture ENTERE IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. WARNING ● Some viewers may experience discomfort while viewing 3D TV such as ◀...
Page 138 Advanced Features ● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ●...
Page 139 ● Mode: Select the 3D input format. If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. When watching 3D images, turn on 3D Active Glasses. 3D Mode Operation Turns the 3D function off.
Page 140 3D Mode Operation Displays the images for the left and right eye alternately in Vertical Stripe for LED TV columns. Displays the images for the left and right eye alternately in Checker Board for LED TV pixels. Displays the images for the left and right eye alternately in Frame Sequential for LED TV frames.
Page 141 ● : Adjust 3D effects like perspective and depth for your 3D Effect for LED TV preferred 3D viewing experience. 3D Effect (Auto / Manual) – Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source. –...
Page 142 ● 3D Auto View (Off / On) : If Message Alert for LED 7000 / PDP 8000 Series and above 3D Auto View is set to On, a “Side by Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. If you set 3D Auto View Message...
Page 143 Support resolution (16:9 only) Resolution Frequency (Hz) 1280 x 720p 25 / 50 Hz 1920 x 1080i 25 / 50 Hz 1920 x 1080p 24 / 30 / 50 / 60 Hz Resolution supported for HDMI PC mode ◀ ▶ The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
Page 144 How to watch the 3D image ● Method 1 Some 3D modes may not be available depending on the format of the image source. To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 1.
Page 145 3. Use the button to select 3D Mode Mode, and then press the ENTERE button. Close ● The displayed image may differ depending on the 4. Using the buttons on your remote model. control, select the 3D Mode of the image you want to view.
Page 146 ● Method 2 1. Press the 3D button on your remote. and then you can view the image. 2. If you want to change 3D options (such as Effect), press the MENU button on your remote, and then select Picture. 3.
Page 147 Supported formats and operating specifications for Standard HDMI 3D The 3D formats indicated below are recommended by the HDMI association and must be supported. Source signal format Standard HDMI 1.4 3D 1920x1080p@24Hz x 2 1920x2205p@24Hz 1280x720p@50Hz x 2 1280x1470p@50Hz ◀ ▶...
Page 148 The mode is automatically switched to 3D mode for the 3D video input in one of the formats above. For the Standard HDMI 3D format with 24Hz, the TV is optimized as follows: ● Resolution First Display Mode: If is set to or Standard, Motion Plus Off, Clear...
Page 149 Before using 3D function... Recommended 3D operating distance Recommended pairing distance 50cm 2~6m Recommended 2~6m (6 to 19.5 ft) viewing distance Recommended ◀ Recommended ▶ viewing distance 50cm (19.5 in) pairing distance NOTE ● is set to automatically when accessing 3D Mode Smart Hub e-Manual...
Page 150 ● is not supported in mode. ● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported. ● When the TV is initially powered on, may take some time until the 3D display is optimized.
Page 151 ● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. Otherwise, you may not be able to enjoy proper 3D effects. ● The ideal viewing distance should be three times or more the height of the screen.
Page 152: Smart Hub
❑ Getting Started with Smart Hub Some functions may not be supported depending on the country. Features Search All Social TV Easily search and access Share your TV viewing content from diverse sources experience with your friends (e.g. applications, Your Video, via social networking service AllShare).
Page 153 Smart Hub Search Your Video Samsung Apps contents and services directly from the web to your TV. Connect to the Internet and enjoy a variety of contents throuth Smart Hub. This feature may not be available in some countries.
Page 154 Recommended Applications: For some of the countries listed, local language characters might not be displayed properly. Displays the recommended TV Screen: Displays the service by Samsung. You are current input source not able to add or delete a screen.. service in this list.
Page 155 NOTE ● Configure the network settings before using Smart Hub . For more information, refer to “Network Settings”. ● Unsupported fonts within the provider’s content will not display normally. ● Slow responses and/or interruptions may occur, depending on your network conditions.
Page 156 ● If you experience a problem using a application, please contact the content provider. ● According to circumstances of the contents provider, an application’s updates or the application itself may be discontinued. ● Depending on your country’s regulations, some applications may have limited service or not be supported.
Page 157 Starting Smart Hub the First Time To start Smart Hub for the first time, follow these steps : 1. Press the SMART HUB button. 2. The Smart Hub screen appears. In a few cases, the Country screen appears immediately after. 3.
Page 158 5. The Internet Privacy Policy screen appears. Press the l / r buttons to select Agree, then press the ENTERE button. 6. The Service Update screen appears and installs a number of services and applications. When done, it closes. The applications and services downloaded are displayed on the Smart Hub screen.
Page 159 Account Login For an application with multiple accounts, select to access the different accounts. For a more enjoyable application experience, register and log in to your account. For instructions on creating an account, refer to “How to create an Smart TV ID”.
Page 160 1. Press the Red button in the home page. Smart Hub 2. Select by pressing the button. The account list appears. If you want to create an account, select Create Account then the create account OSD window will appear. 3. Select the desired ID, and the press the button.
Page 161 How to create a Smart TV ID Before creating a Smart TV ID, you should download the application first on the Samsung Apps. 1. Press the Red button. The Login screen appears. 2. Select Account. The screen will appear. Create Create Account 3.
Page 162 Using the Keypad Pressing the TTX/MIX button on the remote while you are using the Screen Keypad enables you to change the text fields to lower case, capitalized case, upper case, numbers and icons. You can use this Screen Keypad in a several Smart Hub applications.
Page 163 4-4. Press the TTX/MIX button on the remote 4 times to change the input mode from numbers to upper case. 4-5. Press the 2 button on the remote 3 times to input C. 4-6. Press the TTX/MIX button on the remote 3 times to change the input mode from upper case to lower case.
Page 164 Method 2: Using the Keypad of T9 type. 4-1. For example, suppose that you want to input “105Chang” 4-2. Press the –button on the remote 3 times to change the input mode from lower case to numbers. 4-3. Press the 1, 0 and 5 button in numerical order. 4-4.
Page 165 6. Account created. You can use the services provided by all users of your Samsung TV with a single login by linking the users’ account to the TV ID. If you want to register a service site ID, select Yes. Service Site list will appear on ◀...
Page 166 7. Select Register of the Service Site you want, then press the ENTERE button. 8. Using number buttons, enter your application site ID and password. Then press ENTERE button. 9. Registered successfully. If you add another service site, select Yes. then press ENTERE button, go to step 5.
Page 167: Setting Up Smart Hub
❑ Setting up Smart Hub Settings ■ Configure Smart Hub settings from this screen. Settings Press button to enter Settings. Account Management Service Manager ● Account Management Reset Properties Register Service Account: Register login information for service sites. ◀ ▶ Close Change Password: Change account...
Page 168 ● Service Manager Ticker Autorun (Off / On): You can set Ticker Autorun to come on when powering on the TV. Ticker function allows you to view content from the current input source and ticker data at the same time. Depending on your country, Ticker application may have a different service...
Page 169 ● Reset: Resets settings to factory default settings. If you want reset Smart Hub Hub, Enter password. Smart The default password set is “0-0-0-0.” If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 →...
Page 170 ● Properties More: Display information about Smart Hub. Terms of Service Agreement: Display the Terms of Service Agreement. ◀ ▶ English...
Page 171: Using The Smart Hub Service
❑ Using the Smart Hub service Samsung Apps ■ Samsung Apps is a store for downloading applications to be used on Samsung TV/AV equipment. Users can enjoy a variety of contents such as videos, music, photos, games, useful information etc. using the downloaded applications.
Page 172 Using the colour buttons with the Samsung What’s New? Welcome to Samsung Apps! More apps are in store for you to enjoy. What’s New? Apps. Accu Weather Video TV store Test User001 Game World Clock ● Red (Login): To log in to the internet...
Page 173 Using the Samsung Apps by category The following categories are available: ● New?: Displays newly registered applications. What’s ● Video: Displays various video media such as movies, TV shows and short length videos. ● Game: Displays various games such as sudoku and chess.
Page 174 Other: Includes other miscellaneous services. ● Account: Displays the application list and your cyber cash balance. Starting in the middle of 2010 (US and Korea only), you can purchase cyber- cash for buying applications through tv.samsung.com. ● Help: If you have questions about Smart Hub, check this section first.
Page 175 [Legal Statement] Due to the various capabilities of products featuring the Samsung Smart Hub - Content Service, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories.
Page 176 ❑ Troubleshooting for Smart Hub Problem Possible Solution Some application contents only The Application content language may be different from the appear in English. How can I change application user interface language. the language? The ability to change the language depends on the service provider.
Page 177 Web Browser ■ 1. To open Browser, press the / d buttons to select Browser, and then press the ENTERE button. The Web Browser may be displayed differently with PC. 2. The Web Browser is not compatible with a Java application. 3.
Page 178 8. ActiveX is not supported. 9. Some options cannot be accessed in Tab mode. (To access such options, switch to Pointer mode.) 10. Some text may appear corrupted because the number of supported fonts is limited. 11. The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading.
Page 179 15. The number of bookmarks and logs that can be saved is limited. 16. The maximum number of windows that can open at the same time may vary depending on the browsing condition or TV model. 17. The web browsing speed depends on the network conditions. 18.
Page 180 22. If you import the bookmark file to a Computer from a TV, the bookmark file will be saved in “Samsung SmartTV Bookmark” folder. 23. If the time is not set in the menu (System → → Clock), the history Time information may not be saved.
Page 181 And if both of you are on Skype, it’s free. Communicate with people around the world! ● The displayed image may differ depending on the For more information, download the Skype model. user's manual from “www.samsung.com.” ◀ ▶ English...
Page 182 IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT ◀...
Page 183 ▶ interruption, disabling, removal of or suspension of any content or service made available through this device. Samsung may impose limits on the use of or access to certain services or content, in any case and without notice or liability.
Page 184: Allshare
(such as your PC) by controlling them on the TV via the network. For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide.
Page 185 If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX,XVID, MP4, 3GPP, AVI, ASF, MKV, etc.)
Page 186: Setting Up Allshare
❑ Setting Up AllShare™ MENU → → → Network AllShare Settings ENTERE AllShare Settings ■ ● Media (On / Off): Enables or disables the media AllShare Settings function. When the media function is on, Media Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC.
Page 187 Media ■ Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function. The Media function is available in all devices which support DLNA DMC. ● Allowed / Denied: Allows/Blocks the the devices. ●...
Page 188 Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played.
Page 189 ● To turn off the media contents transmission from the mobile phone, set Media in the AllShare Settings. ● Contents may not be played on your TV depending on their resolution and format. ● ENTERE buttons may not work depending on the type of media content.
Page 190 How to play a media content saved on the connected device 1. Press the MENU button on your remote, use the button to select Network, and then press the button. ENTERE 2. Use the button to select in the menu, and AllShare Settings Network then press the...
Page 191 6. Press the EXIT button to exit the menu, and then press the SMART HUB button. 7. Use the button to select AllShare™, and then use the button to select device. The Media Contents menu will open where you can play saved content on the selected device.
Page 192: Anynet
What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Page 193 For the method of connecting external devices , refer to the supported user manual. NOTE ● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. ● The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function.
Page 194 ● You can connect only one Home Theatre. ● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Page 195 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus.
Page 196: Setting Up Anynet
❑ Setting Up Anynet+ → → → MENUm System Anynet+ (HDMI-CEC) ENTERE Anynet+ (HDMI-CEC) (Off / On) ■ To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Page 197 Auto Turn Off (No / Yes) ■ Setting an Anynet+ Device to turn off automatically when the TV is turned off. Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. May not be enabled depending on the device.
Page 198 ❑ Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. If you cannot find a device you want, select Refresh to refresh the list. 2. Select a device and press the ENTERE button.
Page 199 ● Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. ● If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
Page 200: Listening Through A Receiver
❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. The receiver will work when you have properly connected the optical in jack ◀...
Page 201 When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.
Page 202 Using the ARC function You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port.
Page 203: Troubleshooting For Anynet
❑ Troubleshooting for Anynet+ Problem Possible Solution • Check if the device is an Anynet+ device. The Anynet+ system Anynet+ does not work. supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. •...
Page 204 • Check if the Anynet+ device is properly connected to the TV and I want to start Anynet+. check if the Anynet+ (HDMI-CEC) is set to in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want.
Page 205 • Check whether or not the device supports Anynet+ functions. The connected device is not displayed. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to in the Anynet+ setup menu. •...
Page 206: Using The Media Contents
❑ Using the Media Contents Enjoy photos, music and video files saved on a Search Your Movie Samsung Apps USB Mass Storage Class (MSC) device. Connect to the Internet and enjoy a variety of contents throuth Smart Hub. 1. Press the SMART HUB button.
Page 207: Connecting A Usb Device
❑ Connecting a USB Device 1. Turn on your TV. TV Rear Panel 2. Connect a USB device containing recorded TV, photo, music and movie files to the USB port on the back or side panel of the TV. USB Drive 3.
Page 208 If an external USB device connected to the TV’s USB port draws an excessive amount of current from the port, the message “USB Power overload” appears on the screen. This is not a problem with the TV, which provides the standard current from its USB ports, but a problem with the external device.
Page 209: Connecting To The Pc Through Network
❑ Connecting to the PC through network You can play pictures, music and videos saved on your PC through a network connection in the SMART HUB mode. 1. For more information on how to configure your network, refer to “Setting the Network”.
Page 210 2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software will be installed. ● You can connect the TV to the PC directly without connecting it through a Sharer (Router). Functions that are not supported when connecting to a PC through a network: ●...
Page 211 AllShare PC Software should be permitted by the firewall programme on your When you use mode through a network connection, depending SMART HUB on the functions of the provided server: ● The sorting method may vary. ● Scene Search function may not be supported. ●...
Page 212 You may experience file stuttering while playing a video in SMART HUB through a network connection. Before using My Contents functions... It might not work properly with unlicenced multimedia files. Need-to-Know List before using Media Contents ● MTP (Media Transfer Protocol) is not supported. ●...
Page 213 Devices should be connected directly to the TV’s USB port. ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ●...
Page 214 ● The maximum supported JPEG resolution is 15360X8640 pixels. ● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ● If the files are sorted by View, up to 1000 files can be displayed in each Folder folder.
Page 215 ● If more than 2 PTP devices are connected, you can only use one at a time. ● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.
Page 216 ● If the TV has been no input during time set in Time, the Auto Protection Screensaver will run. ● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
Page 217 Screen Display Move to the file you desired using the u / d / buttons and then press the ENTERE (Play) button. The file is played. ∂ Device name: Displays a connected device name. Home: Return to content Music home Change Contents/Device: Upper Folder Sweet Candy Changes the content type or...
Page 218: Recorded Tv
If you format the device, all files will be deleted. Before formatting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Page 219 Timer Recording Schedule Manager) ■ Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. Using the Timer Recording function (digital channels only) 1. Press the ENTERE button to select Schedule Manager.
Page 220 3. Press the button to select the Timer Recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. A USB storage device cannot record until it completes the Device Performance Test.
Page 221 To record a current broadcasting programme Allows you to record a programme currently being broadcasted. Set the current time first to use this function. 1. When you watch a broadcast programme, press the (REC) button on the � remote to record. A pop up window will appear. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
Page 222 Using the Timeshift function If you missed a live broadcast, you can see from the recorded broadcast using this feature. 1. When you watch a broadcast programme, press the (Play) button on the ∂ remote to start the Timeshift function. 2.
Page 223 mode operates for a maximum of 90 minutes. Timeshift After the Timeshift mode function has run for the maximum time, the time information will be fixed to “00:00:00.” function is not supported for analogue channels. Timeshift functions are disabled for channels locked with Timeshift Channel Lock.
Page 224 Before using the Timeshift and a record function... Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that files saved on the TV cannot be used after the main board is changed. NOTE ●...
Page 225 ● If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed. ● When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the HDMI-CEC feature, recording by the PVR function takes precedence.
Page 226 ● An application which supports neither the recording nor the Timeshift function will close automatically if you try to use it during either function. ● A message may appear in front of the application window indicating that the recording or the Timeshift function is closed.
Page 227 ● If you press (REC) on the remote control while the Channel screen is � being displayed or record with Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to process the command.
Page 228 Playing Recorded TV Programme 1. Press the l / r / u / button to select the desired file in the file list. 2. Press the ENTERE button or (Play) button. ∂ ● The selected file is displayed on the top with its playing time. ●...
Page 229: Videos
Videos ■ Playing Video 1. Press the l / r / u / button to select 1:02:15 / 2:04:10 3/15 the desired file in the file list. 1:02:15 / 2:04:10 2. Press the ENTERE button or (Play) ∂ button. ◀ ▶ ● The displayed image may differ depending on the model.
Page 230 ● The selected file is displayed on the top with its playing time. ● If video time information is unknown, play time and progress bar are not displayed. ● During playing the video, you can search using the button. ● You can use (REW) and (FF) buttons during playback.
Page 231 In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle Formats Name File extension Format MPEG-4 time-based text .txt SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based ◀...
Page 232: Supported Video Formats
● Supported Video Formats Frame rate Bit rate File Extension Container Video Codec Resolution Audio Codec (fps) (Mbps) Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 MP3 / AC3 XviD 1920x1080 6 ~ 30 *.avi / LPCM / H.264 BP / MP / HP 1920x1080 6 ~ 30...
Page 233 Frame rate Bit rate File Extension Container Video Codec Resolution Audio Codec (fps) (Mbps) H.264 BP / MP / HP 1920x1080 6 ~ 30 ADPCM / *.3gp 3GPP AAC / HE- MPEG4 SP / ASP 1920x1080 6 ~ 30 MPEG1 352x288 24 / 25 / 30 AC3 / MPEG...
Page 234 Other Restrictions NOTE ● Video content will not play, or not play correctly, if there is an error in the content or the container. ● Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. ●...
Page 235 Video Decoder Audio Decoder • • Supports up to H.264, Level 4.1 Supports up to WMA 7, 8, 9, STD • • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 WMA 9 PRO does not support 2 channel excess and AVCHD are not supported.
Page 236 Playing movie file continuously (Resume Play) If you exit the playing Videos function, it can be played later from the point where it was stopped. Resume function does not support multiple users. (It will have only memorised the point where the most recent user stopped playing.) 1.
Page 237 Using the Scene Search function If you want to use the Scene Search function during playback, you can explore scene divided in to 5 chapters you want. If the index information is damaged or Scene Search unsupported, you will not be able to use the 00:12:20 00:24:40 00:36:59...
Page 238 1. Select the movie file you want to play from the file list section. 2. press the (play) or ENTERE button. ∂ 3. Press the TOOLS button, and then press the button to select Scene Search. A pop up window appears. 4.
Page 239: Music
Music ■ Playing Music 1. Press the l / r / u / button to select the Playlist Music_1 desired music file in the file list. Singer I Love You Musi Music_2 Ming No S No Sing Musi Musi i c_3 Love No S Singe inge nger...
Page 240 Only displays the files with MP3 extension. Other file extensions are not displayed, even if they are saved on the same USB device. If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) ◀...
Page 241 Creating My Playlist 1. On the Music screen in the SMART HUB menu, press the l / r / u / button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / button to select the tracks you want to add and press the ENTERE button.
Page 242 4. Press the button. The message “Selected items added to My ENTERE Playlist” is displayed. 5. The newly created or updated playlist will be in the main page. Music Playing My Playlist Select the My Playlist folder and it will play automatically. Press the button to select a different music file within the play list.
Page 243 Playing the selected music files 1. On the Music screen in the SMART HUB menu, press the l / r / u / button to select Edit Mode, and then press the ENTERE button. 2. Press the l / r / u / button to select the desired music file in the file list, and then ENTERE button.
Page 244 NOTE ● The check box mark appears to the left of the selected files. ● To select all the files in the current page, select Select All in this page at the top. ● To cancel a selection, press the button again.
Page 245: Photos
Photos ■ Viewing a Photo (or Slide Show) Normal Friends.jpg 1024 X 768 2011/01/03 1. Press the l / r / u / button to select the desired file in the file list. 2. Press the ENTERE button. ● When you press the (Play) button ∂...
Page 246 ● All files in the file list section will be displayed in the slide show. ● During the slide show, files are displayed in order from currently being shown. Music files can be automatically played during the slide show if the Background is set to On.
Page 247: Media Contents - Additional Function
❑ Media Contents - Additional Function Sorting the file list To sort files in the file list, select Sorting by using the l / r / u / button. And then press the ENTERE button. Recorded Category Operations Videos Music Photos Default is sorted by Title without Default >...
Page 248 Recorded Category Operations Videos Music Photos Earliest Sorts and shows files by the earliest > > > Date date. Sorts the music file by artist in Artist > alphabetical order. Sorts the music file by album in Album > alphabetical order. Genre Sorts music files by the genre.
Page 249 Videos / Music / Photos Play Option menu The following functions are enabled during playback. Recorded Category Operations Videos Music Photos Return to the file list. List > > > > Play continuosly A movie file will begin to play from >...
Page 250 Recorded Category Operations Videos Music Photos Set files you watch frequently as Edit Favorites > favorites. You can use the Scene Search function during playback to view or Scene Search > > start a movie from the scene of your choice.
Page 251 Recorded Category Operations Videos Music Photos You can adjust the picture size to your Picture Size > > preference. You can change the Sound Mode Sound Mode. > > > > Picture Mode You can change the Picture Mode. > >...
Page 252 Recorded Category Operations Videos Music Photos Previous Next Go to previous / next photo file. > Displays the Subtitle Setting. You can Subtitle Setting > > set up a subtitle option. You can start or stop a slide show. Start Slide Show Alternatively, the or ∑ button on Stop Slide...
Page 253 Recorded Category Operations Videos Music Photos Background You can start or stop a background > Music On music. You can set and select background Background music when watching a photo file or > Music Setting slide show. You can zoom into images in full Zoom >...
Page 254: Other Information
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Page 255 Issues Solutions and Explanations • If you have an analogue cable/set top box, upgrade to a digital set top The TV image does not look as good as it did in the store. box. Use HDMI or Component cables to deliver HD (high definition) picture quality.
Page 256 Issues Solutions and Explanations • Compression of video contents may cause picture distortion especially The picture is distorted: macro block error, small block, dots, in fast moving pictures such as sports and action movies. pixelization • Low signal level or bad quality can cause picture distortion. This is not a TV issue.
Page 257 Issues Solutions and Explanations • Adjust the options in the TV menu (go to mode / Picture Picture There is poor colour or brightness. Colour Brightness / Sharpness) • Adjust Energy Saving option in the TV menu (go to MENU – System –...
Page 258 Issues Solutions and Explanations • If connected with a cable box, please try to reset the cable box. When changing channels, the picture freezes or is distorted or Reconnect the AC cord and wait until the cable box reboots. It may take delayed.
Page 259 Issues Solutions and Explanations • Set the Speaker Select option to in the sound menu. TV Speaker The picture is good but there is no sound. • If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV.
Page 260 Issues Solutions and Explanations • Check the cable connections. Make sure a video cable is not connected The speakers are making an inappropriate noise. to an audio input. • For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion.
Page 261 Issues Solutions and Explanations • Ensure the is set to in the Setup menu. Sleep Timer The TV turns off automatically. • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
Page 262 Issues Solutions and Explanations RF(Cable/Antenna) Connection • Make sure the Antenna cable is connected securely. The TV is not receiving all channels. • Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - Setup Plug &...
Page 263 The video is OK but there is no audio. your PC. Network Connection • The Samsung Wireless USB dongle is required to use a wireless The wireless network connection failed. network. • Make sure the Network Connection is set to Wireless.
Page 264 Issues Solutions and Explanations Recording / Timeshift • See the manual for the USB device to check that the USB device supports recording. • If the USB device has a lock, ensure it is off. The USB device is not recognized or a Device •...
Page 265 Issues Solutions and Explanations • Check that a USB device is connected. • Check that the channel is a recordable digital channel. The recording function does • If the signal is weak or does not exist, the recording function will not work.
Page 266 Issues Solutions and Explanations • These problems may occur if you use a low-performance USB device A message indicates a performance test failure, and that does not support recording. We recommend using a USB HDD the recording and Timeshift with at least 5 400 rpm, but a USB HDD of RAID type is not supported. Mode functions do not work.
Page 267 Issues Solutions and Explanations • If multiple recording devices are connected and the device set as Several recording devices are connected but the TV stopped Default Recording Device has no free memory space, the recording recording. function will be closed. Attempt recording again. The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording.
Page 268 Issues Solutions and Explanations • To minimize the possibility of screen burn, this unit is equipped with Image Retention (Burn In) Issue. for PDP TV screen burn reduction technology. • Pixel Shift technology enables you to set picture movement up / down (Vertical Line) and side to side (Horizontal Dot).
Page 269 Programme the Cable/Set top box remote control to operate the TV. The cable/set top box remote control doesn’t turn the TV on Refer to the Cable/Set top box user manual for the SAMSUNG TV code. or off, or adjust the volume. •...
Page 270 Issues Solutions and Explanations • This function is only available with digital channels from an Antenna / The TV Signal Information unavailable in the Self Diagnosis RF/Coax connection. Test menu. • Remove the base stand from the TV and reassemble it. The TV is tilted to the side.
Page 271 Issues Solutions and Explanations • If the TV is in the mode, it will reset audio and picture Store Demo Your settings are lost after 30 minutes or every time the TV is settings every 30 minutes. Change the settings from Store Demo mode turned off.
Page 272 Issues Solutions and Explanations • This is part of the product’s design and is not a defect. You see small particles when you look closely at the edge of the frame of the TV. • functionality is only available when you are using a HDMI, PC or menu is not available.
Page 273 Issues Solutions and Explanations • Check and change the signal/source. There are recurrent picture/ sound issues. • To prevent this, use felt pads on any surface of the TV that comes in A reaction may occur between the rubber cushion pads on the direct contact with furniture.
Page 274: Analogue Channel Teletext Feature
❑ Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
Page 275 Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit (Teletext on/mix/off) teletext. Stores the Teletext pages. (store) Displays the teletext on the upper half of the screen in double-size. To move the text to (size) the lower half of the screen, press it again.
Page 276 Colour buttons (red, If the FASTEXT system is used by the broadcasting company, the different topics on a green, yellow, blue) Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed.
Page 277 Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. (hold) Displays the next Teletext page. (page up) Displays the previous Teletext page. (page down) ◀ ▶...
Page 278 Typical Teletext page Part Contents Selected page number. Broadcasting channel identity. ◀ ▶ Current page number or search indications. Date and time. Text. Status information. FASTEXT information. English...
Page 279: Licence
❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Labs, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;...
Page 280 DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.

Samsung UA60D8000 E-Manual

Quick Links

Troubleshooting

Related Manuals for Samsung UA60D8000

Summary of Contents for Samsung UA60D8000

Table of Contents