Table of Contents
Advertisement
LCD DISPLAY INFORMATION
WHEN POWER IS ON
If a disc is in, auto adjustment starts. During adjustment, display shows - -.
!
If no disc, Er is displayed. Put the disc in and close the lid. Auto adjust-
!
ment starts.
If the lid is opened, display shows - -. Closing the lid starts auto adjustment.
!
If disc player is unable to read TOC then Er is displayed.
!
Note: TOC means Table Of Contents.
When TOC data has been read, display shows TOC for 1 second.
!
Starts play from track No.1 automatically. ESP starts flashing.
!
Press ESP key, then ESP disappears on display, and ESP is turned off.
HOLD SWITCH
This switch prevents accidental selection of an unwanted function during
!
Playback or Stop mode.
In the HOLD "ON" position, no function button on the unit can be
!
operated. (except OPEN).
Moving the swtich to the "OFF" postion will allow the unit to
return to normal operation.
Set the HOLD switch to "OFF" position before operating the unit.
!
NORMAL PLAYBACK
Play the whole disc. Set the HOLD switch to OFF position to allow normal
operation. A
to be changed.
TO PLAY FROM STOP CONDITION
Press the PLAY/PAUSE button, the display changes to 01 and starts play.
!
When the memory is full, ESP stops flashing.
!
TO STOP
Press the STOP key. This will stop play and the TOC will be displayed.
TO PAUSE
Press the PLAY/PAUSE and the pause on/off button alternately. On pause
condition, track no. on the display will flash.
REPEAT PLAY
Every time the MODE button is pressed, the corresponding mode appears
in the display window.
QUICK REFERENCE
indicator appears on the display when the batteries need
GB-2
Advertisement
Table of Contents
