SAFETY PRECAUTIONS PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The appratus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
QUICK REFERENCE LCD DISPLAY INFORMATION WHEN POWER IS ON If a disc is in, auto adjustment starts. During adjustment, display shows - -. If no disc, Er is displayed. Put the disc in and close the lid. Auto adjust- ment starts. If the lid is opened, display shows - -.
QUICK REFERENCE (CONTINUED) Shown on the LCD display. The current track on the disc will be played repeatedly. Shown on the LCD display. All tracks on the disc will be played repeatedly. NOTE: In normal mode, none of the above symbols will be shown in the display.
POWER SOURCE Battery Power Operation 1. Open the battery compartment cover and insert two “AA” alka- line batteries inside the battery compartment. Follow the polar- ity as indicated (batteries not i n c l u d e d ) i n t h e b a t t e r y compartment.
OPERATION BASIC DISC PLAY Set the HOLD switch to OFF position to allow normal operation. This CD-player can play Audio Discs such as CD-Recordables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CDs. 1. Connect the headphones to the PHONES (GREEN) socket. 2.
CARE AND MAINTENANCE CLEANING DISCS Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a soft cloth should remove most particles.
CARE AND MAINTENANCE (CONTINUE) HANDLING COMPACT DISCS This unit is designed to play only compact discs bearing the identification logo below. Other discs may not conform to the CD standard and may not play properly. Dirty, scratched or warped discs may cause skipping or noise.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not turn on. HOLD switch is “ON” Set the HOLD switch to OFF position to allow nor- mal operation.