Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AirMobi iTravel3
Summary of Contents for AirMobi iTravel3
- Page 1 Quick Installation Guide Wireless Travel Router iTravel3 V1.0...
-
Page 2: Package Contents
Package contents iTravel3 x 1 Mirco USB Cable x 1 Quick Installation Guide x 1 Note: If any of items is missing or damaged, please contact your retailer. Hardware... - Page 3 Item Description Mode Switch 3G/Repeater/Router Used for charging the device Long press the button for at least 5 seconds, Reset and then the router will restore to the default setting Used for charging the smart phone USB 1.0A Used for charging the smart phone or tablet USB 2.1A Long press the button for Startup &...
-
Page 4: Working Mode
In this mode, the Ethernet port works as a LAN port. Recommend for: outdoor environment, mobile office, etc. Repeater Mode (Wireless Repeater) In Repeater mode, iTravel3 extends the coverage of your existing wireless router. Recommend for: villa, big house, etc. -
Page 5: Network Configuration
3G Mode Setup 1. Power on the iTravel3 and wait for Status LED turn from red to blue, and then insert your 3G SIM card into the USB port of the iTravel3. 2. On your computer/ Smart phone /tablet, find and connect to iTravel3’s WiFi network to access Internet. - Page 6 3. If you want to setup the password of iTravel3’s WiFi, please open a web browser and enter “c.cctairmobi.com” or ”192.168.8.8” in the address bar and login. No Username and Password by default. If you want to set them, please click ”System tools->User Settings”...
-
Page 7: Repeater Mode Setup
Repeater Mode Setup 1. Check the device connection that follows the diagram in Working Mode. Power on the iTravel3 and wait for Status LED turn from red to blue. 2. On your computer/ Smart phone /tablet, find and connect to iTravel3’s WiFi network. - Page 8 When the connection is completed, the default setting is Synchronism SSID. The iTravel3 will use the same wireless network name (SSID) and password as your existing wireless router. If “Synchronism SSID” is not checked, click the Next button to configure your WiFi security, enter the name and password for the extender wireless network.
-
Page 9: Router Mode Setup
2. Log in to setup wizard page, follow Setup Wizard to complete setup. 3. Click Next button to configure Internet connection in Router mode. In Router mode, there are three Internet connections available: Static IP, DHCP, and PPPoE. iTravel3 will choose the right connection automatically and he configuration data can you only need to fill in the corresponding parameters. - Page 10 DNS Server Address provided by your ISP. 4. Click the Next button into configure your WiFi security, enter the WiFi name and password for iTravel3’s wireless network. 5. Click the Next button, complete the network configuration in Router mode. Connect your computer/Smart phone/tablet to the new created...
-
Page 11: Power Bank
Power Bank iTravel3 as a power bank, built in 10400mAh lithium battery, can charge the mobile devices such as smart phones, tablet, etc. You can press the Battery Level LED to check the remaining capacity of battery. Output 1.0A is only for smart phone,and Output 2.1A is for smart... - Page 12 For more information or troubleshooting help, please download the User Manual from our website: www.cctairmobi.com Additional support is also available on our website.It contains the latest user documentations and software updates for AirMobi products. Support E-mail Address: support@cctairmobi.com Copyright© 2013 Shenzhen Huaxunark Technology Co., Ltd. All rights reserved.
Need help?
Do you have a question about the iTravel3 and is the answer not in the manual?
Questions and answers