Wi AudioLink
RECEIVER CONNECTION
5.
Turn ON the receiver by pressing and holding the POWER
v
button
on the receiver for 2 seconds.
F
The Power Status LED on the receiver will show Solid Green LED.
F
The flashing Green LED on the transmitter will turn to Solid Green indicating
communication between the transmitter and receiver has been established.
6.
Place the receiver on the amp as shown. Alternatively the
receiver can be placed next to the foot pedal or stomp box.
7.
Power up your Amp, Mixer, Digital Recorder or Foot pedal and you
are ready to go!
28
(Rx)
v