Table of Contents
Advertisement
Wi AudioLink
RECEIVER CONNECTION
Connecting Analog and Digital Devices to Your Receiver!
The Wi AudioLink receiver supports connections to analog and digital device such as Mixers, Amplifiers,
Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, DJ gear, and more...
Please note connections must be made with the power turned off. Please be aware that
careless operation may damage your speaker system or cause malfunctions.
If you've connected a stereo audio amp, be aware that playing at high volume may
damage your speaker system. Be careful not to raise the volume excessively.
1.
For a (Mono) connection locate the 1/4" mono to 1/8" stereo cable.
For a (Stereo) connection locate the 1/4" stereo Y-split to 1/8" stereo cable.
2.
Connect the 1/8" stereo end of the cable into the "Audio Input" jack
on the transmitter.
26
Audio Output
Jack
1/4" Stereo Y-Split to 1/8'
Stereo Cable
Advertisement
Table of Contents
