Return To Normal Driving - PEUGEOT 308 2008 Owner's Manual

Programming
Turn dial 1 to the "CRUISE"
position: the cruise control mode
is selected but is not switched on
(OFF).
Set the programmed speed by
accelerating
speed, then press button 2 or 3
(e.g.: 70 mph (110 km/h)).
You can then change the programmed speed using buttons
2 and 3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Switch off the cruise control by pressing button 4 : the
Switch the cruise control back on by pressing button
4 again.
Exceeding the programmed speed
Return to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automatically can-

Return to normal driving

Turn dial 1 to the "0" position: the cruise control mode
is deselected. The display returns to the distance
recorder.
to the required
DRIVING
Operating fault
In the event of a cruise control malfunc-
tion, the speed is cleared resulting in
Have it checked by a PEUGEOT dealer.
!
When the cruise control is switched
on, be careful if you maintain the
pressure on one of the programmed
speed changing buttons: this may
result in a very rapid change in the
speed of your vehicle.
Do not use the cruise control on
On a steep descent, the cruise
control will not be able to prevent
grammed speed.
To avoid any risk of jamming of the
pedals:
- ensure that the mat is positioned
correctly,
another.